[PATCH v5 3/4] arm64: dts: mt8192: Add H264 venc device node

[Matthias Brugger]

On 30/03/2022 15:38, Allen-KH Cheng wrote:
> Adds H264 venc node for mt8192 SoC.
> 
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

I told you in v4 that I'll apply it, but it's not in the repo. It seemed I 
accidentely dropped that one, so I apply it again now. If you realize something 
like this in the future don't hesitate to tell me :)

Thanks!

> ---
>   arch/arm64/boot/dts/mediatek/mt8192.dtsi | 23 +++++++++++++++++++++++
>   1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index c1057878e2c6..3d61238fb102 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -1166,6 +1166,29 @@
>   			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
>   		};
>   
> +		vcodec_enc: vcodec at 17020000 {
> +			compatible = "mediatek,mt8192-vcodec-enc";
> +			reg = <0 0x17020000 0 0x2000>;
> +			iommus = <&iommu0 M4U_PORT_L7_VENC_RCPU>,
> +				 <&iommu0 M4U_PORT_L7_VENC_REC>,
> +				 <&iommu0 M4U_PORT_L7_VENC_BSDMA>,
> +				 <&iommu0 M4U_PORT_L7_VENC_SV_COMV>,
> +				 <&iommu0 M4U_PORT_L7_VENC_RD_COMV>,
> +				 <&iommu0 M4U_PORT_L7_VENC_CUR_LUMA>,
> +				 <&iommu0 M4U_PORT_L7_VENC_CUR_CHROMA>,
> +				 <&iommu0 M4U_PORT_L7_VENC_REF_LUMA>,
> +				 <&iommu0 M4U_PORT_L7_VENC_REF_CHROMA>,
> +				 <&iommu0 M4U_PORT_L7_VENC_SUB_R_LUMA>,
> +				 <&iommu0 M4U_PORT_L7_VENC_SUB_W_LUMA>;
> +			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>;
> +			mediatek,scp = <&scp>;
> +			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
> +			clocks = <&vencsys CLK_VENC_SET1_VENC>;
> +			clock-names = "venc-set1";
> +			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
> +		};
> +
>   		camsys: clock-controller at 1a000000 {
>   			compatible = "mediatek,mt8192-camsys";
>   			reg = <0 0x1a000000 0 0x1000>;