[PATCH v13 2/2] arm64: dts: Add mediatek SoC mt8195 and evaluation board

Chunfeng Yun chunfeng.yun at mediatek.com
Thu Mar 31 00:29:58 PDT 2022


On Wed, 2022-03-30 at 17:45 +0800, Tinghan Shen wrote:
> Add basic chip support for mediatek mt8195.
> 
> Signed-off-by: Seiya Wang <seiya.wang at mediatek.com>
> Signed-off-by: Tinghan Shen <tinghan.shen at mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> ---
>  arch/arm64/boot/dts/mediatek/Makefile       |    1 +
>  arch/arm64/boot/dts/mediatek/mt8195-evb.dts |  173 +++
>  arch/arm64/boot/dts/mediatek/mt8195.dtsi    | 1045
> +++++++++++++++++++
>  3 files changed, 1219 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile
> b/arch/arm64/boot/dts/mediatek/Makefile
> index 8c1e18032f9f..5da29e7223e4 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -38,4 +38,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-
> sku0.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> new file mode 100644
> index 000000000000..76b5aaad7263
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> @@ -0,0 +1,173 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Author: Seiya Wang <seiya.wang at mediatek.com>
> + */
> +/dts-v1/;
> +#include "mt8195.dtsi"
> +
> +/ {
> +	model = "MediaTek MT8195 evaluation board";
> +	compatible = "mediatek,mt8195-evb", "mediatek,mt8195";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:921600n8";
> +	};
> +
> +	memory at 40000000 {
> +		device_type = "memory";
> +		reg = <0 0x40000000 0 0x80000000>;
> +	};
> +};
> +
> +&auxadc {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0_pin>;
> +	clock-frequency = <100000>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pin>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c4_pin>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c6_pin>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&nor_flash {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&nor_pins_default>;
> +
> +	flash at 0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		spi-max-frequency = <50000000>;
> +	};
> +};
> +
> +&pio {
> +	i2c0_pin: i2c0-pins {
> +		pins {
> +			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
> +				 <PINMUX_GPIO9__FUNC_SCL0>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> +			mediatek,drive-strength-adv = <0>;
> +			drive-strength = <6>;
> +		};
> +	};
> +
> +	i2c1_pin: i2c1-pins {
> +		pins {
> +			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
> +				 <PINMUX_GPIO11__FUNC_SCL1>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> +			mediatek,drive-strength-adv = <0>;
> +			drive-strength = <6>;
> +		};
> +	};
> +
> +	i2c4_pin: i2c4-pins {
> +		pins {
> +			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
> +				 <PINMUX_GPIO17__FUNC_SCL4>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> +			mediatek,drive-strength-adv = <7>;
> +		};
> +	};
> +
> +	i2c6_pin: i2c6-pins {
> +		pins {
> +			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
> +				 <PINMUX_GPIO26__FUNC_SCL6>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> +		};
> +	};
> +
> +	i2c7_pin: i2c7-pins {
> +		pins {
> +			pinmux = <PINMUX_GPIO27__FUNC_SCL7>,
> +				 <PINMUX_GPIO28__FUNC_SDA7>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> +		};
> +	};
> +
> +	nor_pins_default: nor-pins {
> +		pins0 {
> +			pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
> +				 <PINMUX_GPIO141__FUNC_SPINOR_CK>,
> +				 <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
> +			bias-pull-down;
> +		};
> +
> +		pins1 {
> +			pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>,
> +				 <PINMUX_GPIO130__FUNC_SPINOR_IO2>,
> +				 <PINMUX_GPIO131__FUNC_SPINOR_IO3>;
> +			bias-pull-up;
> +		};
> +	};
> +
> +	uart0_pin: uart0-pins {
> +		pins {
> +			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
> +				 <PINMUX_GPIO99__FUNC_URXD0>;
> +		};
> +	};
> +};
> +
> +&u3phy0 {
> +	status="okay";
> +};
> +
> +&u3phy1 {
> +	status="okay";
> +};

Seems forget to enable &phy2/3? due to xhci2/3 are enabled below

> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pin>;
> +	status = "okay";
> +};
> +
> +&xhci0 {
> +	status = "okay";
> +};
> +
> +&xhci1 {
> +	status = "okay";
> +};
> +
> +&xhci2 {
> +	status = "okay";
> +};
> +
> +&xhci3 {
> +	/* This controller is connected with a BT device.
> +	 * Disable usb2 lpm to prevent known issues.
> +	 */
> +	usb2-lpm-disable;
> +	status = "okay";
> +};
> 
[skip]


More information about the Linux-mediatek mailing list