[PATCH] PCI: mediatek-gen3: Print LTSSM state when PCIe link down
Jianjun Wang
jianjun.wang at mediatek.com
Mon Mar 28 19:00:49 PDT 2022
On Mon, 2022-03-28 at 16:39 +0200, AngeloGioacchino Del Regno wrote:
> Il 24/03/22 08:25, Jianjun Wang ha scritto:
> > Print current LTSSM state when PCIe link down instead of the
> > register
> > value, make it easier to get the link status.
> >
> > Signed-off-by: Jianjun Wang <jianjun.wang at mediatek.com>
>
> Hello Jianjun,
> this patch is really helpful when comes to understand the source of
> an issue,
> so I agree with it - and thank you for that.
>
> Though, I think that you should still print the hex number along with
> the
> meaning of it, check below:
>
> > ---
> > drivers/pci/controller/pcie-mediatek-gen3.c | 40
> > ++++++++++++++++++++-
> > 1 file changed, 39 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c
> > b/drivers/pci/controller/pcie-mediatek-gen3.c
> > index 7705d61fba4c..54663f025e27 100644
> > --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
>
> ..snip..
>
> > @@ -327,8 +358,15 @@ static int mtk_pcie_startup_port(struct
> > mtk_gen3_pcie *pcie)
> > !!(val & PCIE_PORT_LINKUP), 20,
> > PCI_PM_D3COLD_WAIT * USEC_PER_MSEC);
> > if (err) {
> > + const char *ltssm_state;
> > + int ltssm_index;
> > +
> > val = readl_relaxed(pcie->base +
> > PCIE_LTSSM_STATUS_REG);
> > - dev_err(pcie->dev, "PCIe link down, ltssm reg val:
> > %#x\n", val);
> > + ltssm_index = PCIE_LTSSM_STATE(val);
> > + ltssm_state = ltssm_index >= ARRAY_SIZE(ltssm_str) ?
> > + "Unknown state" : ltssm_str[ltssm_index];
> > + dev_err(pcie->dev, "PCIe link down, current ltssm
> > state: %s\n",
>
> There, I think that you should do:
>
> dev_err(pcie->dev, "PCIe link down, current LTSSM state: %s (%#x)\n",
> ltssm_state, val);
>
> this will be extremely useful in the "Unknown state" case.
>
> After fixing that,
>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
Thanks!
>
> Regards,
> Angelo
More information about the Linux-mediatek
mailing list