[PATCH v4 21/22] arm64: dts: mt8192: Add gce info for display nodes

[Allen-KH Cheng]

Add gce info for display nodes
- It's required to get drivers' CMDQ support

Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8192.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 08e0dd2483d1..f0f0f067c023 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -1203,6 +1203,9 @@
 		mmsys: syscon at 14000000 {
 			compatible = "mediatek,mt8192-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST 1>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST 1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
@@ -1212,6 +1215,8 @@
 			reg = <0 0x14001000 0 0x1000>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
+					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
 		};
 
 		smi_common: smi at 14002000 {
@@ -1253,6 +1258,7 @@
 			iommus = <&iommu0 M4U_PORT_L0_OVL_RDMA0>,
 				 <&iommu0 M4U_PORT_L0_OVL_RDMA0_HDR>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
 		};
 
 		ovl_2l0: ovl at 14006000 {
@@ -1263,6 +1269,7 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
 			iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0>,
 				 <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0_HDR>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
 		};
 
 		rdma0: rdma at 14007000 {
@@ -1274,6 +1281,7 @@
 			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <5120>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>;
 		};
 
 		color0: color at 14009000 {
@@ -1283,6 +1291,7 @@
 			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
 		};
 
 		ccorr0: ccorr at 1400a000 {
@@ -1291,6 +1300,7 @@
 			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
 		};
 
 		aal0: aal at 1400b000 {
@@ -1300,6 +1310,7 @@
 			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
 		};
 
 		gamma0: gamma at 1400c000 {
@@ -1309,6 +1320,7 @@
 			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
 
 		postmask0: postmask at 1400d000 {
@@ -1318,6 +1330,7 @@
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
 			iommus = <&iommu0 M4U_PORT_L0_DISP_POSTMASK0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
 		};
 
 		dither0: dither at 1400e000 {
@@ -1327,6 +1340,7 @@
 			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
 		};
 
 		dsi0: dsi at 14010000 {
@@ -1351,6 +1365,7 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL2_2L>;
 			iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2>,
 				 <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2_HDR>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
 		};
 
 		rdma4: rdma at 14015000 {
@@ -1361,6 +1376,7 @@
 			clocks = <&mmsys CLK_MM_DISP_RDMA4>;
 			iommus = <&iommu0 M4U_PORT_L1_DISP_RDMA4>;
 			mediatek,rdma-fifo-size = <2048>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
 		};
 
 		dpi0: dpi at 14016000 {
-- 
2.18.0