[PATCH v3 12/21] arm64: dts: mt8192: Add mmc device nodes

allen-kh.cheng allen-kh.cheng at mediatek.com
Fri Mar 18 05:19:11 PDT 2022


Hi Angelo,


On Tue, 2022-03-15 at 15:47 +0100, AngeloGioacchino Del Regno wrote:
> Il 04/03/22 14:08, Allen-KH Cheng ha scritto:
> > Add mmc nodes for mt8192 SoC.
> > 
> > Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8192.dtsi | 34
> > +++++++++++++++++++++---
> >   1 file changed, 30 insertions(+), 4 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > index 6220d6962f58..4e4081ea7db5 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > @@ -1150,10 +1150,36 @@
> >   			#clock-cells = <1>;
> >   		};
> >   
> > -		msdc: clock-controller at 11f60000 {
> > -			compatible = "mediatek,mt8192-msdc";
> > -			reg = <0 0x11f60000 0 0x1000>;
> > -			#clock-cells = <1>;
> > +		mmc0: mmc at 11f60000 {
> > +			compatible = "mediatek,mt8192-mmc",
> > "mediatek,mt8183-mmc";
> > +			reg = <0 0x11f60000 0 0x1000>, <0 0x11f50000 0
> > 0x1000>;
> > +			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH
> > 0>;
> > +			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
> > +				 <&msdc_top CLK_MSDC_TOP_H_MST_0P>,
> > +				 <&msdc_top CLK_MSDC_TOP_SRC_0P>,
> > +				 <&msdc_top CLK_MSDC_TOP_P_CFG>,
> > +				 <&msdc_top CLK_MSDC_TOP_AXI>,
> > +				 <&msdc_top
> > CLK_MSDC_TOP_AHB2AXI_BRG_AXI>,
> > +				 <&msdc_top CLK_MSDC_TOP_P_MSDC0>;
> > +			clock-names = "source", "hclk", "source_cg",
> > "sys_cg",
> > +				      "axi_cg", "ahb_cg", "pclk_cg";
> 
> Can you please use the same clock order as specified in the dt-
> bindings?
> This means that "pclk_cg" goes before "axi_cg".
> 

Sure, I will update in the next version

Thanks,
Allen

> 				 <&msdc_top CLK_MSDC_TOP_P_MSDC0>,
> 				 <&msdc_top
> CLK_MSDC_TOP_AHB2AXI_BRG_AXI>,
> 				 <&msdc_top CLK_MSDC_TOP_AXI>;
> 		clock-names = "source", "hclk", "source_cg", "sys_cg",
> 			      "pclk_cg", "axi_cg", "ahb_cg";
> 
> > +			status = "disabled";
> > +		};
> > +
> > +		mmc1: mmc at 11f70000 {
> > +			compatible = "mediatek,mt8192-mmc",
> > "mediatek,mt8183-mmc";
> > +			reg = <0 0x11f70000 0 0x1000>, <0 0x11c70000 0
> > 0x1000>;
> > +			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH
> > 0>;
> > +			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
> > +				 <&msdc_top CLK_MSDC_TOP_H_MST_1P>,
> > +				 <&msdc_top CLK_MSDC_TOP_SRC_1P>,
> > +				 <&msdc_top CLK_MSDC_TOP_P_CFG>,
> > +				 <&msdc_top CLK_MSDC_TOP_AXI>,
> > +				 <&msdc_top
> > CLK_MSDC_TOP_AHB2AXI_BRG_AXI>,
> > +				 <&msdc_top CLK_MSDC_TOP_P_MSDC1>;
> 
> same here please.
> 
> > +			clock-names = "source", "hclk", "source_cg",
> > "sys_cg",
> > +				      "axi_cg", "ahb_cg", "pclk_cg";
> > +			status = "disabled";
> >   		};
> >   
> >   		mfgcfg: clock-controller at 13fbf000 {
> 
> After applying the requested changes,
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> 
> Thanks,
> Angelo




More information about the Linux-mediatek mailing list