[PATCH v3 19/21] arm64: dts: mt8192: Add dsi node

[AngeloGioacchino Del Regno]

Il 04/03/22 14:08, Allen-KH Cheng ha scritto:
> Add dsi ndoe for mt8192 SoC.
> 
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8192.dtsi | 14 ++++++++++++++
>   1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index 94f88e52776b..3d16cb0b3ea1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -1327,6 +1327,20 @@
>   			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
>   		};
>   
> +		dsi0: dsi at 14010000 {
> +			compatible = "mediatek,mt8183-dsi";
> +			reg = <0 0x14010000 0 0x1000>;
> +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
> +			mediatek,syscon-dsi = <&mmsys 0x140>;

mediatek,syscon-dsi does not exist upstream: here we have proper reset controller
support.

> +			clocks = <&mmsys CLK_MM_DSI0>,
> +				 <&mmsys CLK_MM_DSI_DSI0>,
> +				 <&mipi_tx0>;
> +			clock-names = "engine", "digital", "hs";
> +			phys = <&mipi_tx0>;
> +			phy-names = "dphy";

On MT8183, we do....
resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;

...so you need to simply replicate for MT8192. Please do.

> +			status = "disabled";
> +		};
> +
>   		ovl_2l2: ovl at 14014000 {
>   			compatible = "mediatek,mt8192-disp-ovl-2l";
>   			reg = <0 0x14014000 0 0x1000>;