[PATCH 2/2] dt-bindings: phy: mediatek: Add YAML schema for PCIe PHY

Chunfeng Yun chunfeng.yun at mediatek.com
Mon Mar 14 20:15:08 PDT 2022


On Mon, 2022-03-14 at 09:42 +0800, Jianjun Wang wrote:
> Hi Krzysztof,
> 
> On Fri, 2022-03-11 at 15:28 +0100, Krzysztof Kozlowski wrote:
> > On 11/03/2022 14:35, Jianjun Wang wrote:
> > > Add YAML schema documentation for PCIe PHY on MediaTek chipsets.
> > > 
> > > Signed-off-by: Jianjun Wang <jianjun.wang at mediatek.com>
> > > ---
> > >  .../bindings/phy/mediatek,pcie-phy.yaml       | 71
> > > +++++++++++++++++++
> > >  1 file changed, 71 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,pcie-
> > > phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,pcie-
> > > phy.yaml
> > > new file mode 100644
> > > index 000000000000..da15b4bf3117
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/phy/mediatek,pcie-
> > > phy.yaml
> > > @@ -0,0 +1,71 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/phy/mediatek,pcie-phy.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: MediaTek PCIe PHY Device Tree Binding
> > 
> > Title is for hardware, so s/Device Tree Binding//
> > 
> > > +
> > > +maintainers:
> > > +  - Jianjun Wang <jianjun.wang at mediatek.com>
> > > +
> > > +description: |
> > > +  The PCIe PHY supports physical layer functionality for PCIe
> > > Gen3
> > > port.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: mediatek,pcie-phy
> > 
> > Is it going to be exactly one pcie-phy for all Mediatek chipsets
> > for
> > next years? Are you sure about that? It sounds highly unlikely....
> 
> We have only one pcie-phy for now, but if this is not recommended, I
> will replace it with a specific name in the next version, thanks for
> your review.
Prefer to add specific ones

> 
> Thanks.
> 
> > 
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  reg-names:
> > > +    items:
> > > +      - const: sif
> > > +
> > > +  "#phy-cells":
> > > +    const: 0
> > > +
> > > +  nvmem-cells:
> > > +    maxItems: 7
> > > +    description:
> > > +      Phandles to nvmem cell that contains the efuse data, if
> > > unspecified,
> > > +      default value is used.
> > > +
> > > +  nvmem-cell-names:
> > > +    items:
> > > +      - const: glb_intr
> > > +      - const: tx_ln0_pmos
> > > +      - const: tx_ln0_nmos
> > > +      - const: rx_ln0
> > > +      - const: tx_ln1_pmos
> > > +      - const: tx_ln1_nmos
> > > +      - const: rx_ln1
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - reg-names
> > > +  - "#phy-cells"
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    pciephy: phy at 11e80000 {
> > > +        compatible = "mediatek,pcie-phy";
> > > +        #phy-cells = <0>;
> > > +        reg = <0x11e80000 0x10000>;
> > > +        reg-names = "sif";
> > > +        nvmem-cells = <&pciephy_glb_intr>,
> > > +                      <&pciephy_tx_ln0_pmos>,
> > > +                      <&pciephy_tx_ln0_nmos>,
> > > +                      <&pciephy_rx_ln0>,
> > > +                      <&pciephy_tx_ln1_pmos>,
> > > +                      <&pciephy_tx_ln1_nmos>,
> > > +                      <&pciephy_rx_ln1>;
> > > +        nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
> > > +                           "tx_ln0_nmos", "rx_ln0",
> > > +                           "tx_ln1_pmos", "tx_ln1_nmos",
> > > +                           "rx_ln1";
> > > +    };
> > 
> > 
> > Best regards,
> > Krzysztof
> 
> 


More information about the Linux-mediatek mailing list