[PATCH 1/2] phy: mediatek: Add PCIe PHY driver
Jianjun Wang
jianjun.wang at mediatek.com
Fri Mar 11 05:35:26 PST 2022
Add PCIe GEN3 PHY driver support on MediaTek chipsets.
Signed-off-by: Jianjun Wang <jianjun.wang at mediatek.com>
---
drivers/phy/mediatek/Kconfig | 11 ++
drivers/phy/mediatek/Makefile | 1 +
drivers/phy/mediatek/phy-mtk-pcie.c | 198 ++++++++++++++++++++++++++++
3 files changed, 210 insertions(+)
create mode 100644 drivers/phy/mediatek/phy-mtk-pcie.c
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 55f8e6c048ab..387ed1b3f2cc 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -55,3 +55,14 @@ config PHY_MTK_MIPI_DSI
select GENERIC_PHY
help
Support MIPI DSI for Mediatek SoCs.
+
+config PHY_MTK_PCIE
+ tristate "MediaTek PCIe-PHY Driver"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
+ select GENERIC_PHY
+ help
+ Say 'Y' here to add support for MediaTek PCIe PHY driver.
+ This driver create the basic PHY instance and provides initialize
+ callback for PCIe GEN3 port, it supports software efuse
+ initialization.
diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
index ace660fbed3a..788c13147f63 100644
--- a/drivers/phy/mediatek/Makefile
+++ b/drivers/phy/mediatek/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o
obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o
+obj-$(CONFIG_PHY_MTK_PCIE) += phy-mtk-pcie.o
phy-mtk-hdmi-drv-y := phy-mtk-hdmi.o
phy-mtk-hdmi-drv-y += phy-mtk-hdmi-mt2701.o
diff --git a/drivers/phy/mediatek/phy-mtk-pcie.c b/drivers/phy/mediatek/phy-mtk-pcie.c
new file mode 100644
index 000000000000..45a67d9171f6
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-pcie.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Jianjun Wang <jianjun.wang at mediatek.com>
+ */
+
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#include "phy-mtk-io.h"
+
+#define PEXTP_ANA_GLB_00_REG 0x9000
+#define PEXTP_ANA_LN0_TX_REG 0xA004
+#define PEXTP_ANA_LN0_RX_REG 0xA03C
+#define PEXTP_ANA_LN1_TX_REG 0xA104
+#define PEXTP_ANA_LN1_RX_REG 0xA13c
+
+/* PEXTP_GLB_00_RG[28:24] Internal Resistor Selection of TX Bias Current */
+#define EFUSE_GLB_INTR_SEL GENMASK(28, 24)
+#define EFUSE_GLB_INTR_VAL(x) ((0x1f & (x)) << 24)
+
+/* PEXTP_ANA_LN_RX_RG[3:0] LN0 RX impedance selection */
+#define EFUSE_LN_RX_SEL GENMASK(3, 0)
+#define EFUSE_LN_RX_VAL(x) (0xf & (x))
+
+/* PEXTP_ANA_LN_TX_RG[5:2] LN0 TX PMOS impedance selection */
+#define EFUSE_LN_TX_PMOS_SEL GENMASK(5, 2)
+#define EFUSE_LN_TX_PMOS_VAL(x) ((0xf & (x)) << 2)
+
+/* PEXTP_ANA_LN_TX_RG[11:8] LN0 TX NMOS impedance selection */
+#define EFUSE_LN_TX_NMOS_SEL GENMASK(11, 8)
+#define EFUSE_LN_TX_NMOS_VAL(x) ((0xf & (x)) << 8)
+
+struct mtk_pcie_phy {
+ struct device *dev;
+ struct phy *phy;
+ void __iomem *sif_base;
+};
+
+static int mtk_pcie_phy_init(struct phy *phy)
+{
+ struct mtk_pcie_phy *pcie_phy = phy_get_drvdata(phy);
+ struct device *dev = pcie_phy->dev;
+ bool nvmem_enabled;
+ u32 glb_intr, tx_pmos, tx_nmos, rx_data;
+ int ret;
+
+ nvmem_enabled = device_property_read_bool(dev, "nvmem-cells");
+ if (!nvmem_enabled)
+ return 0;
+
+ /* Set efuse value for lane0 */
+ ret = nvmem_cell_read_variable_le_u32(dev, "tx_ln0_pmos", &tx_pmos);
+ if (ret) {
+ dev_err(dev, "%s: Failed to read tx_ln0_pmos\n", __func__);
+ return ret;
+ }
+
+ ret = nvmem_cell_read_variable_le_u32(dev, "tx_ln0_nmos", &tx_nmos);
+ if (ret) {
+ dev_err(dev, "%s: Failed to read tx_ln0_nmos\n", __func__);
+ return ret;
+ }
+
+ ret = nvmem_cell_read_variable_le_u32(dev, "rx_ln0", &rx_data);
+ if (ret) {
+ dev_err(dev, "%s: Failed to read rx_ln0\n", __func__);
+ return ret;
+ }
+
+ /* Don't wipe the old data if there is no data in efuse cell */
+ if (!(tx_pmos || tx_nmos || rx_data)) {
+ dev_warn(dev, "%s: No efuse data found, but dts enable it\n",
+ __func__);
+ return 0;
+ }
+
+ mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN0_TX_REG,
+ EFUSE_LN_TX_PMOS_SEL,
+ EFUSE_LN_TX_PMOS_VAL(tx_pmos));
+
+ mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN0_TX_REG,
+ EFUSE_LN_TX_NMOS_SEL,
+ EFUSE_LN_TX_NMOS_VAL(tx_nmos));
+
+ mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN0_RX_REG,
+ EFUSE_LN_RX_SEL, EFUSE_LN_RX_VAL(rx_data));
+
+ /* Set global data */
+ ret = nvmem_cell_read_variable_le_u32(dev, "glb_intr", &glb_intr);
+ if (ret) {
+ dev_err(dev, "%s: Failed to read glb_intr\n", __func__);
+ return ret;
+ }
+
+ mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_GLB_00_REG,
+ EFUSE_GLB_INTR_SEL, EFUSE_GLB_INTR_VAL(glb_intr));
+
+ /*
+ * Set efuse value for lane1, only available for the platform which
+ * supports two lane.
+ */
+ ret = nvmem_cell_read_variable_le_u32(dev, "tx_ln1_pmos", &tx_pmos);
+ if (ret) {
+ dev_err(dev, "%s: Failed to read tx_ln1_pmos, efuse value not support for lane 1\n",
+ __func__);
+ return 0;
+ }
+
+ ret = nvmem_cell_read_variable_le_u32(dev, "tx_ln1_nmos", &tx_nmos);
+ if (ret) {
+ dev_err(dev, "%s: Failed to read tx_ln1_pmos\n", __func__);
+ return ret;
+ }
+
+ ret = nvmem_cell_read_variable_le_u32(dev, "rx_ln1", &rx_data);
+ if (ret) {
+ dev_err(dev, "%s: Failed to read rx_ln1\n", __func__);
+ return ret;
+ }
+
+ if (!(tx_pmos || tx_nmos || rx_data))
+ return 0;
+
+ mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN1_TX_REG,
+ EFUSE_LN_TX_PMOS_SEL,
+ EFUSE_LN_TX_PMOS_VAL(tx_pmos));
+
+ mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN1_TX_REG,
+ EFUSE_LN_TX_NMOS_SEL,
+ EFUSE_LN_TX_NMOS_VAL(tx_nmos));
+
+ mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN1_RX_REG,
+ EFUSE_LN_RX_SEL, EFUSE_LN_RX_VAL(rx_data));
+
+ return 0;
+}
+
+static const struct phy_ops mtk_pcie_phy_ops = {
+ .init = mtk_pcie_phy_init,
+ .owner = THIS_MODULE,
+};
+
+static int mtk_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy_provider *provider;
+ struct mtk_pcie_phy *pcie_phy;
+
+ pcie_phy = devm_kzalloc(dev, sizeof(*pcie_phy), GFP_KERNEL);
+ if (!pcie_phy)
+ return -ENOMEM;
+
+ pcie_phy->dev = dev;
+
+ pcie_phy->sif_base = devm_platform_ioremap_resource_byname(pdev, "sif");
+ if (IS_ERR(pcie_phy->sif_base)) {
+ dev_err(dev, "%s: Failed to map phy-sif base\n", __func__);
+ return PTR_ERR(pcie_phy->sif_base);
+ }
+
+ pcie_phy->phy = devm_phy_create(dev, dev->of_node, &mtk_pcie_phy_ops);
+ if (IS_ERR(pcie_phy->phy)) {
+ dev_err(dev, "%s: Failed to create PCIe phy\n", __func__);
+ return PTR_ERR(pcie_phy->phy);
+ }
+
+ phy_set_drvdata(pcie_phy->phy, pcie_phy);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id mtk_pcie_phy_of_match[] = {
+ { .compatible = "mediatek,pcie-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mtk_pcie_phy_of_match);
+
+static struct platform_driver mtk_pcie_phy_driver = {
+ .probe = mtk_pcie_phy_probe,
+ .driver = {
+ .name = "mtk-pcie-phy",
+ .of_match_table = mtk_pcie_phy_of_match,
+ },
+};
+module_platform_driver(mtk_pcie_phy_driver);
+
+MODULE_DESCRIPTION("MediaTek PCIe PHY driver");
+MODULE_AUTHOR("Jianjun Wang <jianjun.wang at mediatek.com>");
+MODULE_LICENSE("GPL v2");
--
2.18.0
More information about the Linux-mediatek
mailing list