[PATCH v14 22/22] arm64: dts: mt8195: add display node for vdosys1

[Nancy.Lin]

Hi Angelo,

Thanks for the review.

On Thu, 2022-03-10 at 11:53 +0100, AngeloGioacchino Del Regno wrote:
> Il 10/03/22 04:55, Nancy.Lin ha scritto:
> > Add display node for vdosys1.
> > 
> > Signed-off-by: Nancy.Lin <nancy.lin at mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8195.dtsi | 223
> > +++++++++++++++++++++++
> >   1 file changed, 223 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > index dbca699bba05..e650ec759235 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> 
> 
> ..snip..
> 
> > +
> > +		ethdr0: ethdr at 1c114000 {
> > +			compatible = "mediatek,mt8195-disp-ethdr";
> > +			reg = <0 0x1c114000 0 0x1000>,
> > +			      <0 0x1c115000 0 0x1000>,
> > +			      <0 0x1c117000 0 0x1000>,
> > +			      <0 0x1c119000 0 0x1000>,
> > +			      <0 0x1c11A000 0 0x1000>,
> > +			      <0 0x1c11B000 0 0x1000>,
> > +			      <0 0x1c11C000 0 0x1000>;
> 
> Hello Nancy,
> looks like you partially forgot to use lower-case hex here...
> 
> 0x1c11a000 0x1c11b000 0x1c11c000
> 
> > +			reg-names = "mixer", "vdo_fe0", "vdo_fe1",
> > "gfx_fe0", "gfx_fe1",
> > +				    "vdo_be", "adl_ds";
> > +			mediatek,gce-client-reg = <&gce0
> > SUBSYS_1c11XXXX 0x4000 0x1000>,
> > +						  <&gce0
> > SUBSYS_1c11XXXX 0x5000 0x1000>,
> > +						  <&gce0
> > SUBSYS_1c11XXXX 0x7000 0x1000>,
> > +						  <&gce0
> > SUBSYS_1c11XXXX 0x9000 0x1000>,
> > +						  <&gce0
> > SUBSYS_1c11XXXX 0xA000 0x1000>,
> > +						  <&gce0
> > SUBSYS_1c11XXXX 0xB000 0x1000>,
> > +						  <&gce0
> > SUBSYS_1c11XXXX 0xC000 0x1000>;
> 
> ...and here too: 0xa000 0xb000 0xc000
> 
> Please fix that, after which, you can add my
> 
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> 

OK, I will fix it. Thank you.

Regards,
Nancy
> > +			clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
> > +				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
> > +				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
> > +				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
> > +				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
> > +				 <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
> > +				 <&vdosys1 CLK_VDO1_26M_SLOW>,
> > +				 <&vdosys1
> > CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
> > +				 <&vdosys1
> > CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
> > +				 <&vdosys1
> > CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
> > +				 <&vdosys1
> > CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
> > +				 <&vdosys1
> > CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
> > +				 <&topckgen CLK_TOP_ETHDR>;
> > +			clock-names = "mixer", "vdo_fe0", "vdo_fe1",
> > "gfx_fe0", "gfx_fe1",
> > +				      "vdo_be", "adl_ds",
> > "vdo_fe0_async", "vdo_fe1_async",
> > +				      "gfx_fe0_async",
> > "gfx_fe1_async","vdo_be_async",
> > +				      "ethdr_top";
> > +			power-domains = <&spm
> > MT8195_POWER_DOMAIN_VDOSYS1>;
> > +			iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
> > +				 <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
> > +			interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH
> > 0>; /* disp mixer */
> > +			resets = <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
> > +				 <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
> > +				 <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
> > +				 <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
> > +				 <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
> > +		};
> > +
> >   	};
> >   };
> 
>