[PATCH] serial: 8250_mtk: make two read-only arrays static const

[Colin Ian King]

Don't populate the read-only arrays fraction_L_mapping and
fraction_M_mapping on the stack but instead make them static
const. Also makes the object code a little smaller.

Signed-off-by: Colin Ian King <colin.i.king at gmail.com>
---
 drivers/tty/serial/8250/8250_mtk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index fb65dc601b23..f4a0caa56f84 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -289,10 +289,10 @@ static void
 mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
 			struct ktermios *old)
 {
-	unsigned short fraction_L_mapping[] = {
+	static const unsigned short fraction_L_mapping[] = {
 		0, 1, 0x5, 0x15, 0x55, 0x57, 0x57, 0x77, 0x7F, 0xFF, 0xFF
 	};
-	unsigned short fraction_M_mapping[] = {
+	static const unsigned short fraction_M_mapping[] = {
 		0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 3
 	};
 	struct uart_8250_port *up = up_to_u8250p(port);
-- 
2.35.1