[PATCH v1 1/2] Revert "dt-bindings:drm/bridge:anx7625:add vendor define"

[Robert Foss]

This reverts commit a43661e7e819b100e1f833a35018560a1d9abb39.
---
 .../display/bridge/analogix,anx7625.yaml      | 65 +------------------
 1 file changed, 2 insertions(+), 63 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index 1d3e88daca041..ab48ab2f4240d 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -43,70 +43,14 @@ properties:
   vdd33-supply:
     description: Regulator that provides the supply 3.3V power.
 
-  analogix,lane0-swing:
-    $ref: /schemas/types.yaml#/definitions/uint8-array
-    minItems: 1
-    maxItems: 20
-    description:
-      an array of swing register setting for DP tx lane0 PHY.
-      Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
-      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
-      Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
-      [Swing control] setting.
-      Registers 0~9, bit 3:0 is [Boost control], these bits control
-      post cursor manual, increase the [Boost control] to increase
-      Pre-emphasis value.
-      Registers 0~9, bit 6:4 is [Swing control], these bits control
-      swing manual, increase [Swing control] setting to add Vp-p value
-      for each Swing, Pre.
-      Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
-      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
-      Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
-      [R Termination control] setting.
-      Registers 10~19, bit 4:0 is [R select control], these bits are
-      compensation manual, increase it can enhance IO driven strength
-      and Vp-p.
-      Registers 10~19, bit 5:6 is [R termination control], these bits
-      adjust 50ohm impedance of DP tx termination. 00:55 ohm,
-      01:50 ohm(default), 10:45 ohm, 11:40 ohm.
-
-  analogix,lane1-swing:
-    $ref: /schemas/types.yaml#/definitions/uint8-array
-    minItems: 1
-    maxItems: 20
-    description:
-      an array of swing register setting for DP tx lane1 PHY.
-      DP TX lane1 swing register setting same with lane0
-      swing, please refer lane0-swing property description.
-
-  analogix,audio-enable:
-    type: boolean
-    description: let the driver enable audio HDMI codec function or not.
-
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port at 0:
-        $ref: /schemas/graph.yaml#/$defs/port-base
-        unevaluatedProperties: false
+        $ref: /schemas/graph.yaml#/properties/port
         description:
-          MIPI DSI/DPI input.
-
-        properties:
-          endpoint:
-            $ref: /schemas/media/video-interfaces.yaml#
-            type: object
-            additionalProperties: false
-
-            properties:
-              remote-endpoint: true
-
-              bus-type:
-                enum: [1, 5]
-                default: 1
-
-              data-lanes: true
+          Video port for MIPI DSI input.
 
       port at 1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -143,9 +87,6 @@ examples:
             vdd10-supply = <&pp1000_mipibrdg>;
             vdd18-supply = <&pp1800_mipibrdg>;
             vdd33-supply = <&pp3300_mipibrdg>;
-            analogix,audio-enable;
-            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
-            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
 
             ports {
                 #address-cells = <1>;
@@ -155,8 +96,6 @@ examples:
                     reg = <0>;
                     anx7625_in: endpoint {
                         remote-endpoint = <&mipi_dsi>;
-                        bus-type = <5>;
-                        data-lanes = <0 1 2 3>;
                     };
                 };
 
-- 
2.32.0