[PATCH 1/2] Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921

Marcel Holtmann marcel at holtmann.org
Fri Mar 4 07:34:38 PST 2022


Hi Sean,

> Add VID 13D3 & PID 3567 for MediaTek MT7921 USB Bluetooth chip.
> 
> The information in /sys/kernel/debug/usb/devices about the Bluetooth
> device is listed as the below.
> 
> T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
> D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=13d3 ProdID=3567 Rev= 1.00
> S:  Manufacturer=MediaTek Inc.
> S:  Product=Wireless_Device
> S:  SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
> E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
> E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
> I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
> E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
> 
> Co-developed-by: Sean Wang <sean.wang at mediatek.com>
> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> Signed-off-by: Yake Yang <yake.yang at mediatek.com>
> ---
> drivers/bluetooth/btusb.c | 3 +++
> 1 file changed, 3 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel




More information about the Linux-mediatek mailing list