[PATCH 1/4] media: mediatek: vcodec: dec: Fix 4K frame size enumeration

[Chen-Yu Tsai]

On Mon, Jun 27, 2022 at 11:32 PM Nicolas Dufresne
<nicolas.dufresne at collabora.com> wrote:
>
> Hi Chen-Yu,
>
> Le lundi 27 juin 2022 à 19:23 +0800, Chen-Yu Tsai a écrit :
> > This partially reverts commit b018be06f3c7 ("media: mediatek: vcodec:
> > Read max resolution from dec_capability"). In this commit, the maximum
> > resolution ended up being a function of both the firmware capability and
> > the current set format.
> >
> > However, frame size enumeration for output (coded) formats should not
> > depend on the format set, but should return supported resolutions for
> > the format requested by userspace.
>
> Good point. Though, I don't see any special casing for the CAPTURE case. As this
> HW does not include a scaler, it must only return 1 resolution when being
> enumerated for CAPTURE side (or not implement that enumeration, but its
> complicated to half implement something in m2m). The return unique size should
> match what G_FMT(CAPTURE) would return.

There are no frame sizes added for the capture formats, so this function
effectively returns -EINVAL for any of them. This is also what rkvdec
does: it only looks through the list of coded formats.

Also, struct v4l2_frmsizeenum does not have a field saying whether it's
capture or output side; it simply specifies a pixel format.

>
> >
> > Fix this so that the driver returns the supported resolutions correctly,
> > even if the instance only has default settings, or if the output format
> > is currently set to VP8F, which does not support 4K.
> >
> > Fixes: b018be06f3c7 ("media: mediatek: vcodec: Read max resolution from dec_capability")
> > Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> > ---
> >  drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c    | 2 --
> >  .../platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c    | 7 +++++++
> >  2 files changed, 7 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> > index 5d6fdf18c3a6..fcb4b8131c49 100644
> > --- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> > +++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> > @@ -595,8 +595,6 @@ static int vidioc_enum_framesizes(struct file *file, void *priv,
> >               fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
> >               fsize->stepwise = dec_pdata->vdec_framesizes[i].stepwise;
> >
> > -             fsize->stepwise.max_width = ctx->max_width;
> > -             fsize->stepwise.max_height = ctx->max_height;
> >               mtk_v4l2_debug(1, "%x, %d %d %d %d %d %d",
> >                               ctx->dev->dec_capability,
> >                               fsize->stepwise.min_width,
> > diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c
> > index 16d55785d84b..9a4d3e3658aa 100644
> > --- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c
> > +++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c
> > @@ -360,6 +360,13 @@ static void mtk_vcodec_add_formats(unsigned int fourcc,
> >
> >               mtk_vdec_framesizes[count_framesizes].fourcc = fourcc;
> >               mtk_vdec_framesizes[count_framesizes].stepwise = stepwise_fhd;
> > +             if (!(ctx->dev->dec_capability & VCODEC_CAPABILITY_4K_DISABLED) &&
> > +                 fourcc != V4L2_PIX_FMT_VP8_FRAME) {
> > +                     mtk_vdec_framesizes[count_framesizes].stepwise.max_width =
> > +                             VCODEC_DEC_4K_CODED_WIDTH;
> > +                     mtk_vdec_framesizes[count_framesizes].stepwise.max_height =
> > +                             VCODEC_DEC_4K_CODED_HEIGHT;
> > +             }
>
> I don't particularly like to see this special cased check being added into
> multiple places. Its also in your patch 2, and I think it exist in a third
> place. Could it be possible to have an internal helper to ensure we don't

It's also in s_fmt(), so touched on in patch 4. I could also rewrite it so
only this spot has the special case, and all the other places look though
mtk_vdec_framesizes to get the maximum, like what I did for try_fmt in
patch 3. What do you think?

Ultimately I think it would be better to move framesizes into the
(driver-specific) pixel format data structure. That is a bigger refactoring
than a simple fix though.

> duplicate this logic ? Somehow, it seems there is something in common between
> set_default, try_fmt and this code.

Yes. That is what I mentioned in chat about refactoring the ioctls and format
handling code. set_default should really not set anything format specific,
but instead call set_fmt with a default format.


Regards
ChenYu

>
> >               num_framesizes++;
> >               break;
> >       case V4L2_PIX_FMT_MM21:
>