[PATCH v2 0/2] MT8192 pinctrl properties adjustments

Linus Walleij linus.walleij at linaro.org
Sat Jun 25 16:23:51 PDT 2022


On Wed, Jun 15, 2022 at 4:23 PM Nícolas F. R. A. Prado
<nfraprado at collabora.com> wrote:
> On Wed, Jun 15, 2022 at 03:31:00PM +0200, Linus Walleij wrote:
> > On Wed, Jun 1, 2022 at 12:19 AM Nícolas F. R. A. Prado
> > <nfraprado at collabora.com> wrote:
> >
> > > The two patches in this series substitute properties in the mt8192
> > > pinctrl dt-binding for ones which have a clearer meaning and are more
> > > standardized. At this point there's no DT using the mt8192 pinctrl
> > > binding, so if such changes are to be made, they need to happen now.
> > >
> > > v1: https://lore.kernel.org/linux-mediatek/20220525155714.1837360-1-nfraprado@collabora.com/
> > >
> > > Changes in v2:
> > > - Dropped Fixes tags
> > > - Added 'if' blocks to enforce mutual exclusion of properties
> >
> > This does not apply on the current pinctrl devel branch:
> > https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
> >
> > Could you please rebase onto my branch and resend as v3?
>
> Hi Linus,
>
> I checked out your branch locally and was able to apply the patch cleanly. Maybe
> you haven't pushed out all your local changes to that branch yet? Otherwise let
> me know and I'll send a rebased v3 to see if it helps in some way.

Doing this:

[linus at fedora linux-pinctrl]$ b4 am -t -S
20220531221954.160036-1-nfraprado at collabora.com
Analyzing 8 messages in the thread
Checking attestation on all messages, may take a moment...
---
  ✓ [PATCH v2 1/2] dt-bindings: pinctrl: mt8192: Switch
drive-strength-adv for -microamp
  ✓ [PATCH v2 2/2] dt-bindings: pinctrl: mt8192: Use generic bias
instead of pull-*-adv
  ---
  ✓ Signed: DKIM/collabora.com
---
Total patches: 2
---
Cover: ./v2_20220531_nfraprado_mt8192_pinctrl_properties_adjustments.cover
 Link: https://lore.kernel.org/r/20220531221954.160036-1-nfraprado@collabora.com
 Base: not specified
       git am ./v2_20220531_nfraprado_mt8192_pinctrl_properties_adjustments.mbx
[linus at fedora linux-pinctrl]$ git am --signoff
./v2_20220531_nfraprado_mt8192_pinctrl_properties_adjustments.mbx
Applying: dt-bindings: pinctrl: mt8192: Switch drive-strength-adv for -microamp
error: patch failed:
Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml:80
error: Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml:
patch does not apply
Patch failed at 0001 dt-bindings: pinctrl: mt8192: Switch
drive-strength-adv for -microamp
hint: Use 'git am --show-current-patch=diff' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

Yours,
Linus Walleij



More information about the Linux-mediatek mailing list