[PATCH] clk: mediatek: clk-mt8195-vdo0: Set rate on vdo0_dp_intf0_dp_intf's parent

[Rex-BC Chen]

On Tue, 2022-06-14 at 17:10 +0800, AngeloGioacchino Del Regno wrote:
> Add the CLK_SET_RATE_PARENT flag to the CLK_VDO0_DP_INTF0_DP_INTF
> clock: this is required to trigger clock source selection on
> CLK_TOP_EDP, while avoiding to manage the enablement of the former
> separately from the latter in the displayport driver.
> 
> Signed-off-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> ---
>  drivers/clk/mediatek/clk-mt8195-vdo0.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/mediatek/clk-mt8195-vdo0.c
> b/drivers/clk/mediatek/clk-mt8195-vdo0.c
> index 261a7f76dd3c..07b46bfd5040 100644
> --- a/drivers/clk/mediatek/clk-mt8195-vdo0.c
> +++ b/drivers/clk/mediatek/clk-mt8195-vdo0.c
> @@ -37,6 +37,10 @@ static const struct mtk_gate_regs vdo0_2_cg_regs =
> {
>  #define GATE_VDO0_2(_id, _name, _parent, _shift)			
> \
>  	GATE_MTK(_id, _name, _parent, &vdo0_2_cg_regs, _shift,
> &mtk_clk_gate_ops_setclr)
>  
> +#define GATE_VDO0_2_FLAGS(_id, _name, _parent, _shift, _flags)	
> 	\
> +	GATE_MTK_FLAGS(_id, _name, _parent, &vdo0_2_cg_regs, _shift,	
> \
> +		       &mtk_clk_gate_ops_setclr, _flags)
> +
>  static const struct mtk_gate vdo0_clks[] = {
>  	/* VDO0_0 */
>  	GATE_VDO0_0(CLK_VDO0_DISP_OVL0, "vdo0_disp_ovl0", "top_vpp",
> 0),
> @@ -85,7 +89,8 @@ static const struct mtk_gate vdo0_clks[] = {
>  	/* VDO0_2 */
>  	GATE_VDO0_2(CLK_VDO0_DSI0_DSI, "vdo0_dsi0_dsi", "top_dsi_occ",
> 0),
>  	GATE_VDO0_2(CLK_VDO0_DSI1_DSI, "vdo0_dsi1_dsi", "top_dsi_occ",
> 8),
> -	GATE_VDO0_2(CLK_VDO0_DP_INTF0_DP_INTF, "vdo0_dp_intf0_dp_intf",
> "top_edp", 16),
> +	GATE_VDO0_2_FLAGS(CLK_VDO0_DP_INTF0_DP_INTF,
> "vdo0_dp_intf0_dp_intf",
> +			  "top_edp", 16, CLK_SET_RATE_PARENT),
>  };
>  
>  static int clk_mt8195_vdo0_probe(struct platform_device *pdev)
> -- 
> 2.35.1
> 

Hello Angelo,

Thanks for this patch.
Another dp clock should also be fix.
After confirming with Jitao who is our dp expert.
The parent of CLK_VDO1_DPINTF should be top_dp instead of top_vpp.

Thanks!

--- a/drivers/clk/mediatek/clk-mt8195-vdo1.c
+++ b/drivers/clk/mediatek/clk-mt8195-vdo1.c
@@ -43,6 +43,9 @@ static const struct mtk_gate_regs vdo1_3_cg_regs = {
 #define GATE_VDO1_2(_id, _name, _parent,
_shift)                       \
        GATE_MTK(_id, _name, _parent, &vdo1_2_cg_regs, _shift,
&mtk_clk_gate_ops_setclr)

+#define GATE_VDO1_2_FLAGS(_id, _name, _parent, _shift,
_flags)                 \
+       GATE_MTK_FLAGS(_id, _name, _parent, &vdo1_2_cg_regs, _shift,
&mtk_clk_gate_ops_setclr, _flags)
+
 #define GATE_VDO1_3(_id, _name, _parent,
_shift)                       \
        GATE_MTK(_id, _name, _parent, &vdo1_3_cg_regs, _shift,
&mtk_clk_gate_ops_setclr)

@@ -99,7 +102,7 @@ static const struct mtk_gate vdo1_clks[] = {
        GATE_VDO1_2(CLK_VDO1_DISP_MONITOR_DPI0,
"vdo1_disp_monitor_dpi0", "top_vpp", 1),
        GATE_VDO1_2(CLK_VDO1_DPI1, "vdo1_dpi1", "top_vpp", 8),
        GATE_VDO1_2(CLK_VDO1_DISP_MONITOR_DPI1,
"vdo1_disp_monitor_dpi1", "top_vpp", 9),
-       GATE_VDO1_2(CLK_VDO1_DPINTF, "vdo1_dpintf", "top_vpp", 16),
+       GATE_VDO1_2_FLAGS(CLK_VDO1_DPINTF, "vdo1_dpintf", "top_dp", 16,
CLK_SET_RATE_PARENT),

BRs,
Bo-Chen