[PATCH v18 3/4] dts: arm64: mt8183: add Mediatek MDP3 nodes
Matthias Brugger
matthias.bgg at gmail.com
Tue Jun 14 08:09:09 PDT 2022
On 10/06/2022 08:45, Moudy Ho wrote:
> Add device nodes for Media Data Path 3 (MDP3) modules.
>
> Signed-off-by: Moudy Ho <moudy.ho at mediatek.com>
Looks good to me. I'm ready to take this as soon as 1,2 and 4 got merged.
Matthias
> ---
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 79 +++++++++++++++++++++++-
> 1 file changed, 78 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index e74fd253478b..ade5997a9656 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -1389,6 +1389,50 @@
> mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
> };
>
> + mdp3-rdma0 at 14001000 {
> + compatible = "mediatek,mt8183-mdp3-rdma";
> + reg = <0 0x14001000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_MDP_RDMA0>,
> + <&mmsys CLK_MM_MDP_RSZ1>;
> + iommus = <&iommu M4U_PORT_MDP_RDMA0>;
> + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
> + <&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
> + };
> +
> + mdp3-rsz0 at 14003000 {
> + compatible = "mediatek,mt8183-mdp3-rsz";
> + reg = <0 0x14003000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_RSZ0>;
> + };
> +
> + mdp3-rsz1 at 14004000 {
> + compatible = "mediatek,mt8183-mdp3-rsz";
> + reg = <0 0x14004000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_RSZ1>;
> + };
> +
> + mdp3-wrot0 at 14005000 {
> + compatible = "mediatek,mt8183-mdp3-wrot";
> + reg = <0 0x14005000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_MDP_WROT0>;
> + iommus = <&iommu M4U_PORT_MDP_WROT0>;
> + };
> +
> + mdp3-wdma at 14006000 {
> + compatible = "mediatek,mt8183-mdp3-wdma";
> + reg = <0 0x14006000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_MDP_WDMA0>;
> + iommus = <&iommu M4U_PORT_MDP_WDMA0>;
> + };
> +
> ovl0: ovl at 14008000 {
> compatible = "mediatek,mt8183-disp-ovl";
> reg = <0 0x14008000 0 0x1000>;
> @@ -1507,7 +1551,33 @@
> interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
> - <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
> + <CMDQ_EVENT_MUTEX_STREAM_DONE1>,
> + <CMDQ_EVENT_MDP_RDMA0_SOF>,
> + <CMDQ_EVENT_MDP_RDMA0_EOF>,
> + <CMDQ_EVENT_MDP_RSZ0_SOF>,
> + <CMDQ_EVENT_MDP_RSZ1_SOF>,
> + <CMDQ_EVENT_MDP_TDSHP_SOF>,
> + <CMDQ_EVENT_MDP_WROT0_SOF>,
> + <CMDQ_EVENT_MDP_WROT0_EOF>,
> + <CMDQ_EVENT_MDP_WDMA0_SOF>,
> + <CMDQ_EVENT_MDP_WDMA0_EOF>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_0>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_1>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_2>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_3>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_4>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_5>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_6>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_7>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_8>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_9>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_10>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_11>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_12>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_13>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_14>,
> + <CMDQ_EVENT_WPE_A_DONE>,
> + <CMDQ_EVENT_SPE_B_DONE>;
> mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
> };
>
> @@ -1532,6 +1602,13 @@
> power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> };
>
> + mdp3-ccorr at 1401c000 {
> + compatible = "mediatek,mt8183-mdp3-ccorr";
> + reg = <0 0x1401c000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_CCORR>;
> + };
> +
> imgsys: syscon at 15020000 {
> compatible = "mediatek,mt8183-imgsys", "syscon";
> reg = <0 0x15020000 0 0x1000>;
More information about the Linux-mediatek
mailing list