[PATCH v11 01/12] dt-bindings: mediatek,dpi: Add DP_INTF compatible

[Bo-Chen Chen]

From: Markus Schneider-Pargmann <msp at baylibre.com>

DP_INTF is similar to DPI but does not have the exact same feature set
or register layouts.

DP_INTF is the sink of the display pipeline that is connected to the
DisplayPort controller and encoder unit. It takes the same clocks as
DPI.

In this patch, we also do these string replacement:
- s/mediatek/MediaTek/ in title.
- s/Mediatek/MediaTek/ in description.

Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
---
 .../bindings/display/mediatek/mediatek,dpi.yaml     | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index 77ee1b923991..ca1b48e78581 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: mediatek DPI Controller Device Tree Bindings
+title: MediaTek DPI and DP_INTF Controller
 
 maintainers:
   - CK Hu <ck.hu at mediatek.com>
   - Jitao shi <jitao.shi at mediatek.com>
 
 description: |
-  The Mediatek DPI function block is a sink of the display subsystem and
-  provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
-  output bus.
+  The MediaTek DPI and DP_INTF function blocks are a sink of the display
+  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+  parallel output bus.
 
 properties:
   compatible:
@@ -24,6 +24,7 @@ properties:
       - mediatek,mt8183-dpi
       - mediatek,mt8186-dpi
       - mediatek,mt8192-dpi
+      - mediatek,mt8195-dp_intf
 
   reg:
     maxItems: 1
@@ -36,12 +37,14 @@ properties:
       - description: Pixel Clock
       - description: Engine Clock
       - description: DPI PLL
+      - description: Clock gate for PLL
 
   clock-names:
     items:
       - const: pixel
       - const: engine
       - const: pll
+      - const: pll_gate
 
   pinctrl-0: true
   pinctrl-1: true
@@ -55,7 +58,7 @@ properties:
     $ref: /schemas/graph.yaml#/properties/port
     description:
       Output port node. This port should be connected to the input port of an
-      attached HDMI or LVDS encoder chip.
+      attached HDMI, LVDS or DisplayPort encoder chip.
 
 required:
   - compatible
-- 
2.18.0