[PATCH v4 0/6] Support mt7531 on BPI-R2 Pro

Frank Wunderlich linux at fw-web.de
Fri Jun 10 10:05:35 PDT 2022


From: Frank Wunderlich <frank-w at public-files.de>

This Series add Support for the mt7531 switch on Bananapi R2 Pro board.

This board uses port5 of the switch to conect to the gmac0 of the
rk3568 SoC.

Currently CPU-Port is hardcoded in the mt7530 driver to port 6.

Compared to v1 the reset-Patch was dropped as it was not needed and
CPU-Port-changes are completely rewriten based on suggestions/code from
Vladimir Oltean (many thanks to this).
In DTS Patch i only dropped the status-property that was not
needed/ignored by driver.

Due to the Changes i also made a regression test on mt7623 bpi-r2
(mt7623 soc + mt7530) and bpi-r64 (mt7622 soc + mt7531) with cpu-
port 6. Tests were done directly (ipv4 config on dsa user port)
and with vlan-aware bridge including vlan that was tagged outgoing
on dsa user port.

v4: 
- rebase on 5.19-rc1
- some changes in bindings-document and fix wrong squashing from v3

Frank Wunderlich (6):
  dt-bindings: net: dsa: convert binding for mediatek switches
  net: dsa: mt7530: rework mt7530_hw_vlan_{add,del}
  net: dsa: mt7530: rework mt753[01]_setup
  net: dsa: mt7530: get cpu-port via dp->cpu_dp instead of constant
  dt-bindings: net: dsa: make reset optional and add rgmii-mode to
    mt7531
  arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board

 .../bindings/net/dsa/mediatek,mt7530.yaml     | 404 ++++++++++++++++++
 .../devicetree/bindings/net/dsa/mt7530.txt    | 327 --------------
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   |  48 +++
 drivers/net/dsa/mt7530.c                      |  82 ++--
 drivers/net/dsa/mt7530.h                      |   1 -
 5 files changed, 505 insertions(+), 357 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt

-- 
2.34.1




More information about the Linux-mediatek mailing list