[PATCH v1 3/4] pinctrl: mediatek: add rsel setting on mt8192
Nícolas F. R. A. Prado
nfraprado at collabora.com
Thu Jun 9 11:47:16 PDT 2022
Hi Guodong,
thank you for the patch. Please see some suggestions below.
On Wed, Jun 08, 2022 at 01:39:08PM +0800, Guodong Liu wrote:
> I2C pins's resistance value can be controlled by rsel register.
> This patch provides rsel (resistance selection) setting on mt8192
Please mention that you're also adding the pull_type array in this commit,
something like: "Also add the missing pull type array for mt8192 to document the
pull type of each pin and prevent invalid pull type settings".
>
> Signed-off-by: Guodong Liu <guodong.liu at mediatek.com>
> ---
> drivers/pinctrl/mediatek/pinctrl-mt8192.c | 204 ++++++++++++++--------
> 1 file changed, 134 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> index d11ff5519e1e..1486c141ee8c 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> @@ -1285,73 +1285,140 @@ static const struct mtk_pin_field_calc mt8192_pin_drv_adv_range[] = {
> PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 6, 3),
> };
>
> -static const struct mtk_pin_field_calc mt8192_pin_e1e0en_range[] = {
> - PIN_FIELD_BASE(118, 118, 4, 0x0040, 0x10, 0, 1),
> - PIN_FIELD_BASE(119, 119, 4, 0x0040, 0x10, 18, 1),
> - PIN_FIELD_BASE(120, 120, 4, 0x0040, 0x10, 15, 1),
> - PIN_FIELD_BASE(121, 121, 4, 0x0050, 0x10, 3, 1),
> - PIN_FIELD_BASE(122, 122, 4, 0x0040, 0x10, 12, 1),
> - PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 0, 1),
> - PIN_FIELD_BASE(124, 124, 4, 0x0040, 0x10, 9, 1),
> - PIN_FIELD_BASE(125, 125, 4, 0x0040, 0x10, 27, 1),
> - PIN_FIELD_BASE(139, 139, 4, 0x0040, 0x10, 6, 1),
> - PIN_FIELD_BASE(140, 140, 4, 0x0040, 0x10, 24, 1),
> - PIN_FIELD_BASE(141, 141, 4, 0x0040, 0x10, 3, 1),
> - PIN_FIELD_BASE(142, 142, 4, 0x0040, 0x10, 21, 1),
> - PIN_FIELD_BASE(160, 160, 7, 0x0030, 0x10, 0, 1),
> - PIN_FIELD_BASE(161, 161, 7, 0x0030, 0x10, 3, 1),
> - PIN_FIELD_BASE(200, 200, 8, 0x0010, 0x10, 3, 1),
> - PIN_FIELD_BASE(201, 201, 8, 0x0010, 0x10, 9, 1),
> - PIN_FIELD_BASE(202, 202, 5, 0x0020, 0x10, 0, 1),
> - PIN_FIELD_BASE(203, 203, 5, 0x0020, 0x10, 3, 1),
> - PIN_FIELD_BASE(204, 204, 8, 0x0010, 0x10, 0, 1),
> - PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 6, 1),
You're dropping E1, E0, and EN arrays here, but these were used by the original
advanced drive configuration, so they should've been dropped in the previous
patch, not in this one.
> +static const struct mtk_pin_field_calc mt8192_pin_rsel_range[] = {
> + PIN_FIELD_BASE(118, 118, 4, 0x00e0, 0x10, 0, 2),
> + PIN_FIELD_BASE(119, 119, 4, 0x00e0, 0x10, 12, 2),
> + PIN_FIELD_BASE(120, 120, 4, 0x00e0, 0x10, 10, 2),
> + PIN_FIELD_BASE(121, 121, 4, 0x00e0, 0x10, 22, 2),
> + PIN_FIELD_BASE(122, 122, 4, 0x00e0, 0x10, 8, 2),
> + PIN_FIELD_BASE(123, 123, 4, 0x00e0, 0x10, 20, 2),
> + PIN_FIELD_BASE(124, 124, 4, 0x00e0, 0x10, 6, 2),
> + PIN_FIELD_BASE(125, 125, 4, 0x00e0, 0x10, 18, 2),
> + PIN_FIELD_BASE(139, 139, 4, 0x00e0, 0x10, 4, 2),
> + PIN_FIELD_BASE(140, 140, 4, 0x00e0, 0x10, 16, 2),
> + PIN_FIELD_BASE(141, 141, 4, 0x00e0, 0x10, 2, 2),
> + PIN_FIELD_BASE(142, 142, 4, 0x00e0, 0x10, 14, 2),
> + PIN_FIELD_BASE(160, 160, 7, 0x00f0, 0x10, 0, 2),
> + PIN_FIELD_BASE(161, 161, 7, 0x00f0, 0x10, 2, 2),
> + PIN_FIELD_BASE(200, 200, 8, 0x0070, 0x10, 2, 2),
> + PIN_FIELD_BASE(201, 201, 8, 0x0070, 0x10, 6, 2),
> + PIN_FIELD_BASE(202, 202, 5, 0x0070, 0x10, 0, 2),
> + PIN_FIELD_BASE(203, 203, 5, 0x0070, 0x10, 2, 2),
> + PIN_FIELD_BASE(204, 204, 8, 0x0070, 0x10, 0, 2),
> + PIN_FIELD_BASE(205, 205, 8, 0x0070, 0x10, 4, 2),
> };
>
> -static const struct mtk_pin_field_calc mt8192_pin_e0_range[] = {
> - PIN_FIELD_BASE(118, 118, 4, 0x0040, 0x10, 1, 1),
> - PIN_FIELD_BASE(119, 119, 4, 0x0040, 0x10, 19, 1),
> - PIN_FIELD_BASE(120, 120, 4, 0x0040, 0x10, 16, 1),
> - PIN_FIELD_BASE(121, 121, 4, 0x0050, 0x10, 4, 1),
> - PIN_FIELD_BASE(122, 122, 4, 0x0040, 0x10, 13, 1),
> - PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 1, 1),
> - PIN_FIELD_BASE(124, 124, 4, 0x0040, 0x10, 10, 1),
> - PIN_FIELD_BASE(125, 125, 4, 0x0040, 0x10, 28, 1),
> - PIN_FIELD_BASE(139, 139, 4, 0x0040, 0x10, 7, 1),
> - PIN_FIELD_BASE(140, 140, 4, 0x0040, 0x10, 25, 1),
> - PIN_FIELD_BASE(141, 141, 4, 0x0040, 0x10, 4, 1),
> - PIN_FIELD_BASE(142, 142, 4, 0x0040, 0x10, 22, 1),
> - PIN_FIELD_BASE(160, 160, 7, 0x0030, 0x10, 1, 1),
> - PIN_FIELD_BASE(161, 161, 7, 0x0030, 0x10, 4, 1),
> - PIN_FIELD_BASE(200, 200, 8, 0x0010, 0x10, 4, 1),
> - PIN_FIELD_BASE(201, 201, 8, 0x0010, 0x10, 10, 1),
> - PIN_FIELD_BASE(202, 202, 5, 0x0020, 0x10, 1, 1),
> - PIN_FIELD_BASE(203, 203, 5, 0x0020, 0x10, 4, 1),
> - PIN_FIELD_BASE(204, 204, 8, 0x0010, 0x10, 1, 1),
> - PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 7, 1),
> -};
> -
> -static const struct mtk_pin_field_calc mt8192_pin_e1_range[] = {
> - PIN_FIELD_BASE(118, 118, 4, 0x0040, 0x10, 2, 1),
> - PIN_FIELD_BASE(119, 119, 4, 0x0040, 0x10, 20, 1),
> - PIN_FIELD_BASE(120, 120, 4, 0x0040, 0x10, 17, 1),
> - PIN_FIELD_BASE(121, 121, 4, 0x0050, 0x10, 5, 1),
> - PIN_FIELD_BASE(122, 122, 4, 0x0040, 0x10, 14, 1),
> - PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 2, 1),
> - PIN_FIELD_BASE(124, 124, 4, 0x0040, 0x10, 11, 1),
> - PIN_FIELD_BASE(125, 125, 4, 0x0040, 0x10, 29, 1),
> - PIN_FIELD_BASE(139, 139, 4, 0x0040, 0x10, 8, 1),
> - PIN_FIELD_BASE(140, 140, 4, 0x0040, 0x10, 26, 1),
> - PIN_FIELD_BASE(141, 141, 4, 0x0040, 0x10, 5, 1),
> - PIN_FIELD_BASE(142, 142, 4, 0x0040, 0x10, 23, 1),
> - PIN_FIELD_BASE(160, 160, 7, 0x0030, 0x10, 2, 1),
> - PIN_FIELD_BASE(161, 161, 7, 0x0030, 0x10, 5, 1),
> - PIN_FIELD_BASE(200, 200, 8, 0x0010, 0x10, 5, 1),
> - PIN_FIELD_BASE(201, 201, 8, 0x0010, 0x10, 11, 1),
> - PIN_FIELD_BASE(202, 202, 5, 0x0020, 0x10, 2, 1),
> - PIN_FIELD_BASE(203, 203, 5, 0x0020, 0x10, 5, 1),
> - PIN_FIELD_BASE(204, 204, 8, 0x0010, 0x10, 2, 1),
> - PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 8, 1),
> +static const unsigned int mt8192_pull_type[] = {
> + MTK_PULL_PU_PD_TYPE,/*0*/ MTK_PULL_PU_PD_TYPE,/*1*/
> + MTK_PULL_PU_PD_TYPE,/*2*/ MTK_PULL_PU_PD_TYPE,/*3*/
> + MTK_PULL_PU_PD_TYPE,/*4*/ MTK_PULL_PU_PD_TYPE,/*5*/
> + MTK_PULL_PU_PD_TYPE,/*6*/ MTK_PULL_PU_PD_TYPE,/*7*/
> + MTK_PULL_PU_PD_TYPE,/*8*/ MTK_PULL_PU_PD_TYPE,/*9*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*10*/ MTK_PULL_PUPD_R1R0_TYPE,/*11*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*12*/ MTK_PULL_PUPD_R1R0_TYPE,/*13*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*14*/ MTK_PULL_PUPD_R1R0_TYPE,/*15*/
> + MTK_PULL_PU_PD_TYPE,/*16*/ MTK_PULL_PU_PD_TYPE,/*17*/
> + MTK_PULL_PU_PD_TYPE,/*18*/ MTK_PULL_PU_PD_TYPE,/*19*/
> + MTK_PULL_PU_PD_TYPE,/*20*/ MTK_PULL_PU_PD_TYPE,/*21*/
> + MTK_PULL_PU_PD_TYPE,/*22*/ MTK_PULL_PU_PD_TYPE,/*23*/
> + MTK_PULL_PU_PD_TYPE,/*24*/ MTK_PULL_PU_PD_TYPE,/*25*/
> + MTK_PULL_PU_PD_TYPE,/*26*/ MTK_PULL_PU_PD_TYPE,/*27*/
> + MTK_PULL_PU_PD_TYPE,/*28*/ MTK_PULL_PU_PD_TYPE,/*29*/
> + MTK_PULL_PU_PD_TYPE,/*30*/ MTK_PULL_PU_PD_TYPE,/*31*/
> + MTK_PULL_PU_PD_TYPE,/*32*/ MTK_PULL_PU_PD_TYPE,/*33*/
> + MTK_PULL_PU_PD_TYPE,/*34*/ MTK_PULL_PU_PD_TYPE,/*35*/
> + MTK_PULL_PU_PD_TYPE,/*36*/ MTK_PULL_PU_PD_TYPE,/*37*/
> + MTK_PULL_PU_PD_TYPE,/*38*/ MTK_PULL_PU_PD_TYPE,/*39*/
> + MTK_PULL_PU_PD_TYPE,/*40*/ MTK_PULL_PU_PD_TYPE,/*41*/
> + MTK_PULL_PU_PD_TYPE,/*42*/ MTK_PULL_PU_PD_TYPE,/*43*/
> + MTK_PULL_PU_PD_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PU_PD_TYPE,/*57*/
> + MTK_PULL_PU_PD_TYPE,/*58*/ MTK_PULL_PU_PD_TYPE,/*59*/
> + MTK_PULL_PU_PD_TYPE,/*60*/ MTK_PULL_PU_PD_TYPE,/*61*/
> + MTK_PULL_PU_PD_TYPE,/*62*/ MTK_PULL_PU_PD_TYPE,/*63*/
> + MTK_PULL_PU_PD_TYPE,/*64*/ MTK_PULL_PU_PD_TYPE,/*65*/
> + MTK_PULL_PU_PD_TYPE,/*66*/ MTK_PULL_PU_PD_TYPE,/*67*/
> + MTK_PULL_PU_PD_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/
> + MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/
> + MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/
> + MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/
> + MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/
> + MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/
> + MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/
> + MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/
> + MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/
> + MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/
> + MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/
> + MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/
> + MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/
> + MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/
> + MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/
> + MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/
> + MTK_PULL_PU_PD_TYPE,/*100*/ MTK_PULL_PU_PD_TYPE,/*101*/
> + MTK_PULL_PU_PD_TYPE,/*102*/ MTK_PULL_PU_PD_TYPE,/*103*/
> + MTK_PULL_PU_PD_TYPE,/*104*/ MTK_PULL_PU_PD_TYPE,/*105*/
> + MTK_PULL_PU_PD_TYPE,/*106*/ MTK_PULL_PU_PD_TYPE,/*107*/
> + MTK_PULL_PU_PD_TYPE,/*108*/ MTK_PULL_PU_PD_TYPE,/*109*/
> + MTK_PULL_PU_PD_TYPE,/*110*/ MTK_PULL_PU_PD_TYPE,/*111*/
> + MTK_PULL_PU_PD_TYPE,/*112*/ MTK_PULL_PU_PD_TYPE,/*113*/
> + MTK_PULL_PU_PD_TYPE,/*114*/ MTK_PULL_PU_PD_TYPE,/*115*/
> + MTK_PULL_PU_PD_TYPE,/*116*/ MTK_PULL_PU_PD_TYPE,/*117*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*118*/ MTK_PULL_PU_PD_RSEL_TYPE,/*119*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*120*/ MTK_PULL_PU_PD_RSEL_TYPE,/*121*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*122*/ MTK_PULL_PU_PD_RSEL_TYPE,/*123*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*124*/ MTK_PULL_PU_PD_RSEL_TYPE,/*125*/
> + MTK_PULL_PU_PD_TYPE,/*126*/ MTK_PULL_PU_PD_TYPE,/*127*/
> + MTK_PULL_PU_PD_TYPE,/*128*/ MTK_PULL_PU_PD_TYPE,/*129*/
> + MTK_PULL_PU_PD_TYPE,/*130*/ MTK_PULL_PU_PD_TYPE,/*131*/
> + MTK_PULL_PU_PD_TYPE,/*132*/ MTK_PULL_PU_PD_TYPE,/*133*/
> + MTK_PULL_PU_PD_TYPE,/*134*/ MTK_PULL_PU_PD_TYPE,/*135*/
> + MTK_PULL_PU_PD_TYPE,/*136*/ MTK_PULL_PU_PD_TYPE,/*137*/
> + MTK_PULL_PU_PD_TYPE,/*138*/ MTK_PULL_PU_PD_RSEL_TYPE,/*139*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*140*/ MTK_PULL_PU_PD_RSEL_TYPE,/*141*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*142*/ MTK_PULL_PU_PD_TYPE,/*143*/
> + MTK_PULL_PU_PD_TYPE,/*144*/ MTK_PULL_PU_PD_TYPE,/*145*/
> + MTK_PULL_PU_PD_TYPE,/*146*/ MTK_PULL_PU_PD_TYPE,/*147*/
> + MTK_PULL_PU_PD_TYPE,/*148*/ MTK_PULL_PU_PD_TYPE,/*149*/
> + MTK_PULL_PU_PD_TYPE,/*150*/ MTK_PULL_PU_PD_TYPE,/*151*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*152*/ MTK_PULL_PUPD_R1R0_TYPE,/*153*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*154*/ MTK_PULL_PUPD_R1R0_TYPE,/*155*/
> + MTK_PULL_PU_PD_TYPE,/*156*/ MTK_PULL_PU_PD_TYPE,/*157*/
> + MTK_PULL_PU_PD_TYPE,/*158*/ MTK_PULL_PU_PD_TYPE,/*159*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*160*/ MTK_PULL_PU_PD_RSEL_TYPE,/*161*/
> + MTK_PULL_PU_PD_TYPE,/*162*/ MTK_PULL_PU_PD_TYPE,/*163*/
> + MTK_PULL_PU_PD_TYPE,/*164*/ MTK_PULL_PU_PD_TYPE,/*165*/
> + MTK_PULL_PU_PD_TYPE,/*166*/ MTK_PULL_PU_PD_TYPE,/*167*/
> + MTK_PULL_PU_PD_TYPE,/*168*/ MTK_PULL_PU_PD_TYPE,/*169*/
> + MTK_PULL_PU_PD_TYPE,/*170*/ MTK_PULL_PU_PD_TYPE,/*171*/
> + MTK_PULL_PU_PD_TYPE,/*172*/ MTK_PULL_PU_PD_TYPE,/*173*/
> + MTK_PULL_PU_PD_TYPE,/*174*/ MTK_PULL_PU_PD_TYPE,/*175*/
> + MTK_PULL_PU_PD_TYPE,/*176*/ MTK_PULL_PU_PD_TYPE,/*177*/
> + MTK_PULL_PU_PD_TYPE,/*178*/ MTK_PULL_PU_PD_TYPE,/*179*/
> + MTK_PULL_PU_PD_TYPE,/*180*/ MTK_PULL_PU_PD_TYPE,/*181*/
> + MTK_PULL_PU_PD_TYPE,/*182*/ MTK_PULL_PUPD_R1R0_TYPE,/*183*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*184*/ MTK_PULL_PUPD_R1R0_TYPE,/*185*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*186*/ MTK_PULL_PUPD_R1R0_TYPE,/*187*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*188*/ MTK_PULL_PUPD_R1R0_TYPE,/*189*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*190*/ MTK_PULL_PUPD_R1R0_TYPE,/*191*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*192*/ MTK_PULL_PUPD_R1R0_TYPE,/*193*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*194*/ MTK_PULL_PU_PD_TYPE,/*195*/
> + MTK_PULL_PU_PD_TYPE,/*196*/ MTK_PULL_PU_PD_TYPE,/*197*/
> + MTK_PULL_PU_PD_TYPE,/*198*/ MTK_PULL_PU_PD_TYPE,/*199*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*200*/ MTK_PULL_PU_PD_RSEL_TYPE,/*201*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*202*/ MTK_PULL_PU_PD_RSEL_TYPE,/*203*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*204*/ MTK_PULL_PU_PD_RSEL_TYPE,/*205*/
> + MTK_PULL_PU_PD_TYPE,/*206*/ MTK_PULL_PU_PD_TYPE,/*207*/
> + MTK_PULL_PU_PD_TYPE,/*208*/ MTK_PULL_PU_PD_TYPE,/*209*/
> + MTK_PULL_PU_PD_TYPE,/*210*/ MTK_PULL_PU_PD_TYPE,/*211*/
> + MTK_PULL_PU_PD_TYPE,/*212*/ MTK_PULL_PU_PD_TYPE,/*213*/
> + MTK_PULL_PU_PD_TYPE,/*214*/ MTK_PULL_PU_PD_TYPE,/*215*/
> + MTK_PULL_PU_PD_TYPE,/*216*/ MTK_PULL_PU_PD_TYPE,/*217*/
> + MTK_PULL_PU_PD_TYPE,/*218*/ MTK_PULL_PU_PD_TYPE,/*219*/
> };
>
>
> @@ -1381,10 +1448,8 @@ static const struct mtk_pin_reg_calc mt8192_reg_cals[PINCTRL_PIN_REG_MAX] = {
> [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8192_pin_pupd_range),
> [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8192_pin_r0_range),
> [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8192_pin_r1_range),
> - [PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8192_pin_e1e0en_range),
> - [PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8192_pin_e0_range),
> [PINCTRL_PIN_REG_DRV_ADV] = MTK_RANGE(mt8192_pin_drv_adv_range),
> - [PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8192_pin_e1_range),
> + [PINCTRL_PIN_REG_RSEL] = MTK_RANGE(mt8192_pin_rsel_range),
> };
>
> static const struct mtk_pin_soc mt8192_data = {
> @@ -1394,6 +1459,7 @@ static const struct mtk_pin_soc mt8192_data = {
> .ngrps = ARRAY_SIZE(mtk_pins_mt8192),
> .base_names = mt8192_pinctrl_register_base_names,
> .nbase_names = ARRAY_SIZE(mt8192_pinctrl_register_base_names),
> + .pull_type = mt8192_pull_type,
> .eint_hw = &mt8192_eint_hw,
> .nfuncs = 8,
> .gpio_m = 0,
> @@ -1401,8 +1467,6 @@ static const struct mtk_pin_soc mt8192_data = {
> .bias_get_combo = mtk_pinconf_bias_get_combo,
> .drive_set = mtk_pinconf_drive_set_rev1,
> .drive_get = mtk_pinconf_drive_get_rev1,
> - .adv_pull_get = mtk_pinconf_adv_pull_get,
> - .adv_pull_set = mtk_pinconf_adv_pull_set,
I understand you're dropping this because the bias_combo getter/setters already
handle all cases, but still this isn't really related to adding rsel, so I think
it'd make more sense in a separate commit. At the very least it should be
mentioned in the commit message.
Thanks,
Nícolas
> .adv_drive_get = mtk_pinconf_adv_drive_get_raw,
> .adv_drive_set = mtk_pinconf_adv_drive_set_raw,
> };
> --
> 2.25.5
>
More information about the Linux-mediatek
mailing list