[PATCH v2 21/48] arm64: dts: mediatek: align gpio-key node names with dtschema

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Thu Jun 9 04:39:54 PDT 2022


The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts      |  4 ++--
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts           |  4 ++--
 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts  |  6 +++---
 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi           | 10 +++++-----
 arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi |  4 ++--
 arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi  |  2 +-
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi         |  2 +-
 arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi       |  4 ++--
 8 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 2b9bf8dd14ec..c2311733d2de 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -40,13 +40,13 @@ cpu at 1 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		factory {
+		factory-key {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		wps-key {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 596c073d8b05..c28da9323a9c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -42,13 +42,13 @@ gpio-keys {
 		compatible = "gpio-keys";
 		poll-interval = <100>;
 
-		factory {
+		key-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 0 0>;
 		};
 
-		wps {
+		key-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 102 0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
index 44f6149c1307..28433b94f7c7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
@@ -21,7 +21,7 @@ cpu_crit: cpu_crit0 {
 };
 
 &gpio_keys {
-	/delete-node/tablet_mode;
-	/delete-node/volume_down;
-	/delete-node/volume_up;
+	/delete-node/switch-tablet-mode;
+	/delete-node/switch-volume-down;
+	/delete-node/switch-volume-up;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 9c75fbb31f98..d20378758213 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -53,7 +53,7 @@ gpio_keys: gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pins>;
 
-		lid {
+		switch-lid {
 			label = "Lid";
 			gpios = <&pio 69 GPIO_ACTIVE_LOW>;
 			linux,code = <SW_LID>;
@@ -61,7 +61,7 @@ lid {
 			gpio-key,wakeup;
 		};
 
-		power {
+		switch-power {
 			label = "Power";
 			gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
@@ -69,7 +69,7 @@ power {
 			gpio-key,wakeup;
 		};
 
-		tablet_mode {
+		switch-tablet-mode {
 			label = "Tablet_mode";
 			gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
 			linux,code = <SW_TABLET_MODE>;
@@ -77,13 +77,13 @@ tablet_mode {
 			gpio-key,wakeup;
 		};
 
-		volume_down {
+		switch-volume-down {
 			label = "Volume_down";
 			gpios = <&pio 123 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		volume_up {
+		switch-volume-up {
 			label = "Volume_up";
 			gpios = <&pio 124 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 2d7a193272ae..3ac83be53627 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -73,7 +73,7 @@ volume_buttons: volume-buttons {
 		pinctrl-names = "default";
 		pinctrl-0 = <&volume_button_pins>;
 
-		volume_down {
+		button-volume-down {
 			label = "Volume Down";
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <100>;
@@ -81,7 +81,7 @@ volume_down {
 			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
 		};
 
-		volume_up {
+		button-volume-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <100>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index 28966a65391b..50a0dd36b5fb 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -45,7 +45,7 @@ gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pen_eject>;
 
-		pen-insert {
+		switch-pen-insert {
 			label = "Pen Insert";
 			/* Insert = low, eject = high */
 			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index b035e06840e6..b50261e8b9ed 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -144,7 +144,7 @@ wifi_wakeup: wifi-wakeup {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_pins_wakeup>;
 
-		wowlan {
+		button-wowlan {
 			label = "Wake on WiFi";
 			gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 7a717f926929..8ee1529683a3 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -28,7 +28,7 @@ gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_default>;
 
-		volume-up {
+		key-volume-up {
 			gpios = <&pio 42 GPIO_ACTIVE_LOW>;
 			label = "volume_up";
 			linux,code = <115>;
@@ -36,7 +36,7 @@ volume-up {
 			debounce-interval = <15>;
 		};
 
-		volume-down {
+		key-volume-down {
 			gpios = <&pio 43 GPIO_ACTIVE_LOW>;
 			label = "volume_down";
 			linux,code = <114>;
-- 
2.34.1




More information about the Linux-mediatek mailing list