[PATCH 2/3] usb: mtu3: implement udc_async_callbacks of gadget operation
Chunfeng Yun
chunfeng.yun at mediatek.com
Thu Jun 9 00:42:32 PDT 2022
Implement udc_async_callbacks hook function to avoid a race when unnbinding
gadget drivers, refer to:
7dc0c55e9f30 ('USB: UDC core: Add udc_async_callbacks gadget op')
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
drivers/usb/mtu3/mtu3.h | 1 +
drivers/usb/mtu3/mtu3_gadget.c | 19 ++++++++++++++++---
drivers/usb/mtu3/mtu3_gadget_ep0.c | 2 +-
3 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index 022bbdc54e68..8408e1b1a24a 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -357,6 +357,7 @@ struct mtu3 {
unsigned delayed_status:1;
unsigned gen2cp:1;
unsigned connected:1;
+ unsigned async_callbacks:1;
u8 address;
u8 test_mode_nr;
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index d57cea62fe6b..30999b4debb8 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -592,6 +592,18 @@ mtu3_gadget_set_speed(struct usb_gadget *g, enum usb_device_speed speed)
spin_unlock_irqrestore(&mtu->lock, flags);
}
+static void mtu3_gadget_async_callbacks(struct usb_gadget *g, bool enable)
+{
+ struct mtu3 *mtu = gadget_to_mtu3(g);
+ unsigned long flags;
+
+ dev_dbg(mtu->dev, "%s %s\n", __func__, enable ? "en" : "dis");
+
+ spin_lock_irqsave(&mtu->lock, flags);
+ mtu->async_callbacks = enable;
+ spin_unlock_irqrestore(&mtu->lock, flags);
+}
+
static const struct usb_gadget_ops mtu3_gadget_ops = {
.get_frame = mtu3_gadget_get_frame,
.wakeup = mtu3_gadget_wakeup,
@@ -600,6 +612,7 @@ static const struct usb_gadget_ops mtu3_gadget_ops = {
.udc_start = mtu3_gadget_start,
.udc_stop = mtu3_gadget_stop,
.udc_set_speed = mtu3_gadget_set_speed,
+ .udc_async_callbacks = mtu3_gadget_async_callbacks,
};
static void mtu3_state_reset(struct mtu3 *mtu)
@@ -697,7 +710,7 @@ void mtu3_gadget_cleanup(struct mtu3 *mtu)
void mtu3_gadget_resume(struct mtu3 *mtu)
{
dev_dbg(mtu->dev, "gadget RESUME\n");
- if (mtu->gadget_driver && mtu->gadget_driver->resume) {
+ if (mtu->async_callbacks && mtu->gadget_driver && mtu->gadget_driver->resume) {
spin_unlock(&mtu->lock);
mtu->gadget_driver->resume(&mtu->g);
spin_lock(&mtu->lock);
@@ -708,7 +721,7 @@ void mtu3_gadget_resume(struct mtu3 *mtu)
void mtu3_gadget_suspend(struct mtu3 *mtu)
{
dev_dbg(mtu->dev, "gadget SUSPEND\n");
- if (mtu->gadget_driver && mtu->gadget_driver->suspend) {
+ if (mtu->async_callbacks && mtu->gadget_driver && mtu->gadget_driver->suspend) {
spin_unlock(&mtu->lock);
mtu->gadget_driver->suspend(&mtu->g);
spin_lock(&mtu->lock);
@@ -719,7 +732,7 @@ void mtu3_gadget_suspend(struct mtu3 *mtu)
void mtu3_gadget_disconnect(struct mtu3 *mtu)
{
dev_dbg(mtu->dev, "gadget DISCONNECT\n");
- if (mtu->gadget_driver && mtu->gadget_driver->disconnect) {
+ if (mtu->async_callbacks && mtu->gadget_driver && mtu->gadget_driver->disconnect) {
spin_unlock(&mtu->lock);
mtu->gadget_driver->disconnect(&mtu->g);
spin_lock(&mtu->lock);
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 0ca47212f1ec..7e7013508af6 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -66,7 +66,7 @@ __acquires(mtu->lock)
{
int ret;
- if (!mtu->gadget_driver)
+ if (!mtu->gadget_driver || !mtu->async_callbacks)
return -EOPNOTSUPP;
spin_unlock(&mtu->lock);
--
2.18.0
More information about the Linux-mediatek
mailing list