[PATCH v4 5/8] drm/panel: panel-simple: Implement .get_orientation callback

Sam Ravnborg sam at ravnborg.org
Mon Jun 6 12:25:11 PDT 2022


Hi Hsin-Yi,

On Mon, Jun 06, 2022 at 11:24:28PM +0800, Hsin-Yi Wang wrote:
> To return the orientation property to drm/kms driver.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
> Reviewed-by: Hans de Goede <hdegoede at redhat.com>
> Reviewed-by: Douglas Anderson <dianders at chromium.org>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 4a2e580a2f7b..f232b8cf4075 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -411,7 +411,12 @@ static int panel_simple_get_modes(struct drm_panel *panel,
>  	/* add hard-coded panel modes */
>  	num += panel_simple_get_non_edid_modes(p, connector);
>  
> -	/* set up connector's "panel orientation" property */
> +	/*
> +	 * drm drivers are expected to call drm_panel_get_orientation() to get
> +	 * panel's orientation then drm_connector_set_panel_orientation() to
> +	 * set the property before drm_dev_register(). Otherwise there will be
> +	 * a WARN_ON if orientation is set after drm is registered.
> +	 */

This comment is not really relevant here. If we need to explain this
then put it in drm_panel.c/h - as this applies for all panels and not
just the panel_simple.
Keep in mind, this is the source new panels often use a inspiration and
no need to have this copied around.

>  	drm_connector_set_panel_orientation(connector, p->orientation);
>  
>  	return num;
> @@ -434,6 +439,14 @@ static int panel_simple_get_timings(struct drm_panel *panel,
>  	return p->desc->num_timings;
>  }
>  
> +static enum drm_panel_orientation panel_simple_get_orientation(struct drm_panel *panel)
> +{
> +       struct panel_simple *p = to_panel_simple(panel);
> +
> +       return p->orientation;
> +}
> +
> +
>  static const struct drm_panel_funcs panel_simple_funcs = {
>  	.disable = panel_simple_disable,
>  	.unprepare = panel_simple_unprepare,
> @@ -441,6 +454,7 @@ static const struct drm_panel_funcs panel_simple_funcs = {
>  	.enable = panel_simple_enable,
>  	.get_modes = panel_simple_get_modes,
>  	.get_timings = panel_simple_get_timings,
> +	.get_orientation = panel_simple_get_orientation,

I like the order in this list to match the order in the .h file.
So my OCD would like you to move it up right after get_modes,
but feel free to ignore this.

With the suggested changes:
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>

>  };
>  
>  static struct panel_desc panel_dpi;
> -- 
> 2.36.1.255.ge46751e96f-goog



More information about the Linux-mediatek mailing list