[PATCH v2] pmic: add mt6366 regulator document

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Thu Jul 28 03:46:51 PDT 2022


On 28/07/2022 08:27, Zhiyong Tao wrote:
> From: zhiyong tao <zhiyong.tao at mediatek.com>
> 
> Add mt6366 regulator document

As usual with Mediatek your emails fail to properly pass modern SMTP
checks and you end up in spam.

I reported it months ago to folks in Mediatek. No improvements since
that time.

I stopped checking my spam folder for Mediatek stuff and all will be
ignored. I will also stop complaining about it - just ignore Mediatek.

Fix your systems, instead of putting additional effort on community and
on reviewers.


> 
> Signed-off-by: zhiyong tao <zhiyong.tao at mediatk.com>
> ---
>  .../regulator/mediatek,mt6366-regulator.yaml  | 375 ++++++++++++++++++
>  1 file changed, 375 insertions(+)

Subject does not match subsystem.


>  create mode 100755 Documentation/devicetree/bindings/regulator/mediatek,mt6366-regulator.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6366-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6366-regulator.yaml
> new file mode 100755
> index 000000000000..eb72c64757cf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6366-regulator.yaml
> @@ -0,0 +1,375 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/mediatek,mt6366-regulator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MT6366 Regulator from MediaTek Integrated
> +
> +maintainers:
> +  - Zhiyong Tao <zhiyong.tao at mediatek.com>
> +
> +description: |
> +  List of regulators provided by this controller. It is named
> +  according to its regulator type, buck_<name> and ldo_<name>.
> +  MT6366 regulators node should be sub node of the MT6397 MFD node.
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt6366-regulator
> +
> +  regulators:
> +    type: object
> +    description: List of regulators and its properties
> +
> +    patternProperties:
> +      "^buck-v(dram1|core|coresshub|proc11|proc12|gpu|s2|modem|s1)$":
> +        type: object
> +        $ref: "regulator.yaml#"

No need for quotes.

> +        unevaluatedProperties: false
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^v(dram1|core|coresshub|proc11|proc12|gpu|s2|modem|s1)$"

Why do you enforce specific regulator-name? Remove.

> +
> +      "^ldo-v(dram2|sim1|ibr|rf12|usb|camio|camd|cn18|fe28)$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^v(dram2|sim1|ibr|rf12|usb|camio|camd|cn18|fe28)$"
> +
> +      "^ldo-v(xo22|efuse|mch|vcama1|emc|a12|vcama2|mc)$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^v(xo22|efuse|mch|vcama1|emc|a12|vcama2|mc)$"
> +
> +      "^buck-(vcore)-sshub$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +        unevaluatedProperties: false
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^vcore-sshub$"
> +
> +      "^ldo-vcn(28|33)-bt$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +        unevaluatedProperties: false
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^vcn(28|33)-bt$"
> +
> +      "^ldo-vcn(33)-wifi$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +        unevaluatedProperties: false
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^vcn33-wifi$"
> +
> +      "^ldo-vsram-(others)-sshub$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +        unevaluatedProperties: false
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^vsram-others-sshub$"
> +
> +      "^ldo-vsram-(proc11|others|gpu|proc12)$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +        unevaluatedProperties: false
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^vsram-(proc11|others|gpu|proc12)$"
> +
> +      "^ldo-v(aud|bif|io|ldo)28$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^v(aud|bif|io|ldo)28$"
> +
> +      "^ldo-v(io|aux|rf)18$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^v(io|aux|rf)18$"
> +
> +      "^ldo-vsim[2]$":
> +        type: object
> +        $ref: "regulator.yaml#"
> +
> +        properties:
> +          regulator-name:
> +            pattern: "^vsim2$"
> +
> +        required:
> +          - regulator-name
> +
> +required:
> +  - compatible
> +  - regulators
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pmic {
> +      compatible = "mediatek,mt6366-regulator";
> +
> +      regulators {
> +        mt6366_vdram1_reg: buck-vdram1 {
> +            regulator-name = "vdram1";

Messed up indentation. Use only one, so 4 space for DTS example.



Best regards,
Krzysztof



More information about the Linux-mediatek mailing list