[PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Balsam CHIHI bchihi at baylibre.com
Wed Jul 27 02:03:36 PDT 2022


On Wed, Jul 27, 2022 at 10:24 AM AngeloGioacchino Del Regno
<angelogioacchino.delregno at collabora.com> wrote:
>
> Il 26/07/22 15:55, Balsam CHIHI ha scritto:
> > Add Mediatek proprietary folder to upstream more thermal zone and cooler
> > drivers. Relocate the original thermal controller driver to it and rename
> > as soc_temp.c to show its purpose more clearly.
> >
> > Signed-off-by: Michael Kao <michael.kao at mediatek.com>
> > Signed-off-by: Ben Tseng <ben.tseng at mediatek.com>
> > Reviewed-by: Matthias Brugger <matthias.bgg at gmail.com>
> > Signed-off-by: Balsam CHIHI <bchihi at baylibre.com>
> > ---
> >   drivers/thermal/Kconfig                       | 14 ++++-------
> >   drivers/thermal/Makefile                      |  2 +-
> >   drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
> >   drivers/thermal/mediatek/Makefile             |  1 +
> >   .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
> >   5 files changed, 29 insertions(+), 11 deletions(-)
> >   create mode 100644 drivers/thermal/mediatek/Kconfig
> >   create mode 100644 drivers/thermal/mediatek/Makefile
> >   rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
> >
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > index 0e5cc948373c..ecba8d6e313b 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -412,16 +412,10 @@ config DA9062_THERMAL
> >         zone.
> >         Compatible with the DA9062 and DA9061 PMICs.
> >
> > -config MTK_THERMAL
> > -     tristate "Temperature sensor driver for mediatek SoCs"
> > -     depends on ARCH_MEDIATEK || COMPILE_TEST
> > -     depends on HAS_IOMEM
> > -     depends on NVMEM || NVMEM=n
> > -     depends on RESET_CONTROLLER
> > -     default y
> > -     help
> > -       Enable this option if you want to have support for thermal management
> > -       controller present in Mediatek SoCs
> > +menu "Mediatek thermal drivers"
> > +depends on ARCH_MEDIATEK || COMPILE_TEST
> > +source "drivers/thermal/mediatek/Kconfig"
> > +endmenu
> >
> >   config AMLOGIC_THERMAL
> >       tristate "Amlogic Thermal Support"
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > index def8e1a0399c..3c00e864ad55 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -55,7 +55,7 @@ obj-y                               += st/
> >   obj-$(CONFIG_QCOM_TSENS)    += qcom/
> >   obj-y                               += tegra/
> >   obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
> > -obj-$(CONFIG_MTK_THERMAL)    += mtk_thermal.o
> > +obj-$(CONFIG_MTK_THERMAL)    += mediatek/
> >   obj-$(CONFIG_GENERIC_ADC_THERMAL)   += thermal-generic-adc.o
> >   obj-$(CONFIG_UNIPHIER_THERMAL)      += uniphier_thermal.o
> >   obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> > diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> > new file mode 100644
> > index 000000000000..9c41e9079fc3
> > --- /dev/null
> > +++ b/drivers/thermal/mediatek/Kconfig
> > @@ -0,0 +1,23 @@
> > +config MTK_THERMAL
> > +     tristate "MediaTek thermal drivers"
> > +     depends on THERMAL_OF
> > +     help
> > +             This is the option for MediaTek thermal software
> > +             solutions. Please enable corresponding options to
> > +             get temperature information from thermal sensors or
> > +             turn on throttle mechaisms for thermal mitigation.
>
> Sorry, I just noticed that the indentation must be fixed.
>
>         help
>           This is the option .....
>
> Thanks,
> Angelo
OK, It will be fixed ASAP.

Thanks,
Balsam.



More information about the Linux-mediatek mailing list