[PATCH v8 5/6] arm64: dts: mt8195: Add efuse node to mt8195

[Balsam CHIHI]

This adds the efuse node. This will be required by the thermal driver
to get the calibration data.

Signed-off-by: Alexandre Bailon <abailon at baylibre.com>
Signed-off-by: Balsam CHIHI <bchihi at baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 0ff34edcf8c8..4fbf24b5d202 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1236,6 +1236,22 @@ nor_flash: spi at 1132c000 {
 			status = "disabled";
 		};
 
+		efuse: efuse at 11c10000 {
+			compatible = "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			lvts_efuse_data1: lvts1-calib at 1bc {
+				reg = <0x1bc 0x14>;
+			};
+			lvts_efuse_data2: lvts2-calib at 1d0 {
+				reg = <0x1d0 0x38>;
+			};
+			svs_calibration: calib at 580 {
+				reg = <0x580 0x64>;
+			};
+		};
+
 		u3phy2: t-phy at 11c40000 {
 			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
 			#address-cells = <1>;
-- 
2.34.1