[PATCH v14 05/10] drm/mediatek: Add MT8195 Embedded DisplayPort driver

CK Hu ck.hu at mediatek.com
Mon Jul 25 02:23:36 PDT 2022


Hi, Bo-Chen:

On Tue, 2022-07-12 at 19:12 +0800, Bo-Chen Chen wrote:
> From: Markus Schneider-Pargmann <msp at baylibre.com>
> 
> This patch adds a embedded displayport driver for the MediaTek mt8195
> SoC.
> 
> It supports the MT8195, the embedded DisplayPort units. It offers
> DisplayPort 1.4 with up to 4 lanes.
> 
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so
> that
> both can work with the same register range. The phy driver sets
> device
> data that is read by the parent to get the phy device that can be
> used
> to control the phy properties.
> 
> This driver is based on an initial version by
> Jitao shi <jitao.shi at mediatek.com>
> 
> Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> Signed-off-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
> ---

[snip]

> +
> +/*
> + * We need to handle HPD signal in eDP even though eDP is a always
> connected
> + * device. Besides connected status, there is another feature for
> HPD signal -
> + * HPD pulse: it presents an IRQ from sink devices to source devices
> (Refer to
> + * 5.1.4 of DP1.4 spec).
> + */
> +static irqreturn_t mtk_dp_hpd_isr_handler(struct mtk_dp *mtk_dp)
> +{
> +	bool hpd_change = false;
> +	u32 irq_status = mtk_dp_swirq_get_clear(mtk_dp) |
> +			 mtk_dp_hwirq_get_clear(mtk_dp);
> +	struct mtk_dp_train_info *train_info = &mtk_dp->train_info;
> +
> +	if (!irq_status)
> +		return IRQ_HANDLED;
> +
> +	if (irq_status & MTK_DP_HPD_INTERRUPT)
> +		train_info->irq_sta.hpd_inerrupt = true;
> +	if (irq_status & MTK_DP_HPD_CONNECT ||
> +	    irq_status & MTK_DP_HPD_DISCONNECT)
> +		hpd_change = true;
> +
> +	if (!(hpd_change))
> +		return IRQ_WAKE_THREAD;
> +
> +	if (mtk_dp_plug_state(mtk_dp))

mtk_dp_plug_state() is called only here, and prevent function call in
isr handler, so squash mtk_dp_plug_state() into this function.

> +		train_info->cable_plugged_in = true;
> +	else
> +		train_info->cable_plugged_in = false;
> +
> +	train_info->cable_state_change = true;
> +
> +	return IRQ_WAKE_THREAD;
> +}
> +
> +static irqreturn_t mtk_dp_hpd_event(int hpd, void *dev)
> +{
> +	struct mtk_dp *mtk_dp = dev;
> +	u32 irq_status;
> +
> +	irq_status = mtk_dp_read(mtk_dp, MTK_DP_TOP_IRQ_STATUS);
> +
> +	if (!irq_status)
> +		return IRQ_HANDLED;
> +
> +	if (irq_status & RGS_IRQ_STATUS_TRANSMITTER)
> +		return mtk_dp_hpd_isr_handler(mtk_dp);

Prevent function call in isr handler, squash mtk_dp_hpd_isr_handler()
into this function.

Regards,
CK

> +
> +	return IRQ_HANDLED;
> +}
> +




More information about the Linux-mediatek mailing list