[PATCH v2 3/4] soc: mediatek: add support of MTK_SCPD_STRICT_BUSP cap
Markus Schneider-Pargmann
msp at baylibre.com
Mon Jul 25 01:18:52 PDT 2022
From: Alexandre Bailon <abailon at baylibre.com>
This adds support for MTK_SCPD_STRICT_BUSP capability. It is a strict
bus protection policy that requires the bus protection to be disabled
before accessing the bus.
This is required by the mt8365, for the MM power domain.
Signed-off-by: Alexandre Bailon <abailon at baylibre.com>
Signed-off-by: Fabien Parent <fparent at baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
---
Notes:
Changes in v2:
- Fixup error handling path.
drivers/soc/mediatek/mtk-pm-domains.c | 29 +++++++++++++++++++++++----
drivers/soc/mediatek/mtk-pm-domains.h | 1 +
2 files changed, 26 insertions(+), 4 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index d0eae2227813..94ca8981f45e 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -240,6 +240,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
struct scpsys *scpsys = pd->scpsys;
bool tmp;
int ret;
+ bool strict_busprotect;
ret = scpsys_regulator_enable(pd->supply);
if (ret)
@@ -263,9 +264,18 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
- ret = clk_bulk_prepare_enable(pd->num_subsys_clks, pd->subsys_clks);
- if (ret)
- goto err_pwr_ack;
+ /*
+ * In few Mediatek platforms(e.g. MT6779), the bus protect policy is
+ * stricter, which leads to bus protect release must be prior to bus
+ * access.
+ */
+ strict_busprotect = MTK_SCPD_CAPS(pd, MTK_SCPD_STRICT_BUSP);
+ if (!strict_busprotect) {
+ ret = clk_bulk_prepare_enable(pd->num_subsys_clks,
+ pd->subsys_clks);
+ if (ret)
+ goto err_pwr_ack;
+ }
ret = scpsys_sram_enable(pd);
if (ret < 0)
@@ -275,12 +285,23 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
if (ret < 0)
goto err_disable_sram;
+ if (strict_busprotect) {
+ ret = clk_bulk_prepare_enable(pd->num_subsys_clks,
+ pd->subsys_clks);
+ if (ret)
+ goto err_enable_bus_protect;
+ }
+
return 0;
+err_enable_bus_protect:
+ scpsys_bus_protect_enable(pd);
err_disable_sram:
scpsys_sram_disable(pd);
err_disable_subsys_clks:
- clk_bulk_disable_unprepare(pd->num_subsys_clks, pd->subsys_clks);
+ if (!strict_busprotect)
+ clk_bulk_disable_unprepare(pd->num_subsys_clks,
+ pd->subsys_clks);
err_pwr_ack:
clk_bulk_disable_unprepare(pd->num_clks, pd->clks);
err_reg:
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index e788d6bdde9d..a50cfb926d22 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -8,6 +8,7 @@
#define MTK_SCPD_SRAM_ISO BIT(2)
#define MTK_SCPD_KEEP_DEFAULT_OFF BIT(3)
#define MTK_SCPD_DOMAIN_SUPPLY BIT(4)
+#define MTK_SCPD_STRICT_BUSP BIT(5)
#define MTK_SCPD_CAPS(_scpd, _x) ((_scpd)->data->caps & (_x))
#define SPM_VDE_PWR_CON 0x0210
--
2.36.1
More information about the Linux-mediatek
mailing list