[PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support

[Pavel Machek]

Hi!

> The MediaTek MT6370 is a highly-integrated smart power management IC,
> which includes a single cell Li-Ion/Li-Polymer switching battery
> charger, a USB Type-C & Power Delivery (PD) controller, dual
> Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> a display bias driver and a general LDO for portable devices.
> 
> In MediaTek MT6370, there are four channel current-sink RGB LEDs that
> support hardware pattern for constant current, PWM, and breath mode.
> Isink4 channel can also be used as a CHG_VIN power good indicator.
> 
> Signed-off-by: ChiYuan Huang <cy_huang at richtek.com>

> index a49979f..71bacb5 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -244,6 +244,20 @@ config LEDS_MT6323
>  	  This option enables support for on-chip LED drivers found on
>  	  Mediatek MT6323 PMIC.
>  
> +config LEDS_MT6370_RGB
> +	tristate "LED Support for MediaTek MT6370 PMIC"
> +	depends on LEDS_CLASS
> +	depends on MFD_MT6370
> +	select LINEAR_RANGE
> +	help
> +	  Say Y here to enable support for MT6370_RGB LED device.
> +	  In MT6370, there are four channel current-sink LED drivers that
> +	  support hardware pattern for constant current, PWM, and breath mode.
> +	  Isink4 channel can also be used as a CHG_VIN power good

Should this go to leds/rgb directory, and should it depend on
multicolor framework?

Best regards,
							Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 195 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20220717/cce528f1/attachment.sig>