[PATCH v2 05/19] dt-bindings: power: mediatek: Refine multiple level power domain nodes

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Fri Jul 15 01:07:40 PDT 2022


On 14/07/2022 14:28, Tinghan Shen wrote:
> Extract duplicated properties and support more levels of power
> domain nodes.
> 
> This change fix following error when do dtbs_check,
>     arch/arm64/boot/dts/mediatek/mt8195-evb.dtb: power-controller: power-domain at 15:power-domain at 16:power-domain at 18: 'power-domain at 19', 'power-domain at 20', 'power-domain at 21' do not match any of the regexes: 'pinctrl-[0-9]+'
> 	 From schema: Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> 
> Signed-off-by: Tinghan Shen <tinghan.shen at mediatek.com>
> ---
>  .../power/mediatek,power-controller.yaml      | 119 +-----------------
>  1 file changed, 6 insertions(+), 113 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> index be81cd97afa4..e5494a330716 100644
> --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> @@ -42,6 +42,10 @@ properties:
>  
>  patternProperties:
>    "^power-domain@[0-9a-f]+$":
> +    $ref: "#/$defs/power-domain-node"
> +
> +$defs:
> +  power-domain-node:
>      type: object
>      description: |
>        Represents the power domains within the power controller node as documented
> @@ -100,122 +104,11 @@ patternProperties:
>          $ref: /schemas/types.yaml#/definitions/phandle
>          description: phandle to the device containing the SMI register range.
>  
> -    patternProperties:
> -      "^power-domain@[0-9a-f]+$":
> -        type: object
> -        description: |
> -          Represents a power domain child within a power domain parent node.
> -
> -        properties:
> -
> -          '#power-domain-cells':
> -            description:
> -              Must be 0 for nodes representing a single PM domain and 1 for nodes
> -              providing multiple PM domains.
> -
> -          '#address-cells':
> -            const: 1
> -
> -          '#size-cells':
> -            const: 0
> -
> -          reg:
> -            maxItems: 1
> -
> -          clocks:
> -            description: |
> -              A number of phandles to clocks that need to be enabled during domain
> -              power-up sequencing.
> -
> -          clock-names:
> -            description: |
> -              List of names of clocks, in order to match the power-up sequencing
> -              for each power domain we need to group the clocks by name. BASIC
> -              clocks need to be enabled before enabling the corresponding power
> -              domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> -              SUSBYS clocks need to be enabled before releasing the bus protection,
> -              and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> -
> -              In order to follow properly the power-up sequencing, the clocks must
> -              be specified by order, adding first the BASIC clocks followed by the
> -              SUSBSYS clocks.
> -
> -          domain-supply:
> -            description: domain regulator supply.
> -
> -          mediatek,infracfg:
> -            $ref: /schemas/types.yaml#/definitions/phandle
> -            description: phandle to the device containing the INFRACFG register range.
> -
> -          mediatek,smi:
> -            $ref: /schemas/types.yaml#/definitions/phandle
> -            description: phandle to the device containing the SMI register range.
> -
> -        patternProperties:
> -          "^power-domain@[0-9a-f]+$":
> -            type: object
> -            description: |
> -              Represents a power domain child within a power domain parent node.
> -
> -            properties:
> -
> -              '#power-domain-cells':
> -                description:
> -                  Must be 0 for nodes representing a single PM domain and 1 for nodes
> -                  providing multiple PM domains.
> -
> -              '#address-cells':
> -                const: 1
> -
> -              '#size-cells':
> -                const: 0
> -
> -              reg:
> -                maxItems: 1
> -
> -              clocks:
> -                description: |
> -                  A number of phandles to clocks that need to be enabled during domain
> -                  power-up sequencing.
> -
> -              clock-names:
> -                description: |
> -                  List of names of clocks, in order to match the power-up sequencing
> -                  for each power domain we need to group the clocks by name. BASIC
> -                  clocks need to be enabled before enabling the corresponding power
> -                  domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> -                  SUSBYS clocks need to be enabled before releasing the bus protection,
> -                  and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> -
> -                  In order to follow properly the power-up sequencing, the clocks must
> -                  be specified by order, adding first the BASIC clocks followed by the
> -                  SUSBSYS clocks.
> -
> -              domain-supply:
> -                description: domain regulator supply.
> -
> -              mediatek,infracfg:
> -                $ref: /schemas/types.yaml#/definitions/phandle
> -                description: phandle to the device containing the INFRACFG register range.
> -
> -              mediatek,smi:
> -                $ref: /schemas/types.yaml#/definitions/phandle
> -                description: phandle to the device containing the SMI register range.
> -
> -            required:
> -              - reg
> -
> -            additionalProperties: false
> -
> -        required:
> -          - reg
> -
> -        additionalProperties: false
> -
>      required:
>        - reg
>  
> -    additionalProperties: false
> +    additionalProperties:
> +      $ref: "#/$defs/power-domain-node"

That's an interesting construction - endless recurrence. I did not know
it works like that... How about making it a bit more specific? Defining
defs "power-domain-node" for just one child (without
additionalProperties piece) and (maybe with just one more level):

@@ -43,6 +43,12 @@ patternProperties:

   "^power-domain@[0-9a-f]+$":

     $ref: "#/$defs/power-domain-node"



+    patternProperties:

+      "^power-domain@[0-9a-f]+$":

+        $ref: "#/$defs/power-domain-node"

+        unevaluatedProperties: false

+    unevaluatedProperties: false

+

 $defs:

   power-domain-node:

     type: object

@@ -105,9 +111,6 @@ $defs:

     required:

       - reg



-    additionalProperties:

-      $ref: "#/$defs/power-domain-node"

-

 required:

   - compatible




Best regards,
Krzysztof



More information about the Linux-mediatek mailing list