[PATCH] mediatek: mt7601u: fix clang -Wformat warning

[Joe Perches]

On Mon, 2022-07-11 at 14:29 -0700, Justin Stitt wrote:
> When building with Clang we encounter this warning:
> > drivers/net/wireless/mediatek/mt7601u/debugfs.c:92:6: error: format
> > specifies type 'unsigned char' but the argument has type 'int'
> > [-Werror,-Wformat] dev->ee->reg.start + dev->ee->reg.num - 1);
> 
> The format specifier used is `%hhu` which describes a u8. Both
> `dev->ee->reg.start` and `.num` are u8 as well. However, the expression
> as a whole is promoted to an int as you cannot get smaller-than-int from
> addition. Therefore, to fix the warning, use the promoted-to-type's
> format specifier -- in this case `%d`.

I think whenever a sizeof(unsigned type) that is less than sizeof(int) is
emitted with vsprintf, the preferred format specifier should be %u not %d.

> diff --git a/drivers/net/wireless/mediatek/mt7601u/debugfs.c b/drivers/net/wireless/mediatek/mt7601u/debugfs.c
[]
> @@ -88,7 +88,7 @@ mt7601u_eeprom_param_show(struct seq_file *file, void *data)
>  		   dev->ee->rssi_offset[0], dev->ee->rssi_offset[1]);
>  	seq_printf(file, "Reference temp: %hhx\n", dev->ee->ref_temp);
>  	seq_printf(file, "LNA gain: %hhx\n", dev->ee->lna_gain);
> -	seq_printf(file, "Reg channels: %hhu-%hhu\n", dev->ee->reg.start,
> +	seq_printf(file, "Reg channels: %hhu-%d\n", dev->ee->reg.start,
>  		   dev->ee->reg.start + dev->ee->reg.num - 1);

And this is not a promotion of an argument to int via varargs.
The arithmetic did the promotion.

I suggest s/%hh/%/ for all the uses here, not just this one.

checkpatch could do this somewhat automatically.
Of course any changes it suggests need human review.

$ ./scripts/checkpatch.pl -f drivers/net/wireless/mediatek/mt7601u/debugfs.c --show-types --types=unnecessary_modifier --fix-inplace
$ git diff --stat -p drivers/net/wireless/mediatek/mt7601u/debugfs.c
---
 drivers/net/wireless/mediatek/mt7601u/debugfs.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/debugfs.c b/drivers/net/wireless/mediatek/mt7601u/debugfs.c
index 20669eacb66ea..b7a6376e3352e 100644
--- a/drivers/net/wireless/mediatek/mt7601u/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt7601u/debugfs.c
@@ -83,28 +83,28 @@ mt7601u_eeprom_param_show(struct seq_file *file, void *data)
 	struct tssi_data *td = &dev->ee->tssi_data;
 	int i;
 
-	seq_printf(file, "RF freq offset: %hhx\n", dev->ee->rf_freq_off);
-	seq_printf(file, "RSSI offset: %hhx %hhx\n",
+	seq_printf(file, "RF freq offset: %x\n", dev->ee->rf_freq_off);
+	seq_printf(file, "RSSI offset: %x %x\n",
 		   dev->ee->rssi_offset[0], dev->ee->rssi_offset[1]);
-	seq_printf(file, "Reference temp: %hhx\n", dev->ee->ref_temp);
-	seq_printf(file, "LNA gain: %hhx\n", dev->ee->lna_gain);
-	seq_printf(file, "Reg channels: %hhu-%hhu\n", dev->ee->reg.start,
+	seq_printf(file, "Reference temp: %x\n", dev->ee->ref_temp);
+	seq_printf(file, "LNA gain: %x\n", dev->ee->lna_gain);
+	seq_printf(file, "Reg channels: %u-%u\n", dev->ee->reg.start,
 		   dev->ee->reg.start + dev->ee->reg.num - 1);
 
 	seq_puts(file, "Per rate power:\n");
 	for (i = 0; i < 2; i++)
-		seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n",
+		seq_printf(file, "\t raw:%02x bw20:%02x bw40:%02x\n",
 			   rp->cck[i].raw, rp->cck[i].bw20, rp->cck[i].bw40);
 	for (i = 0; i < 4; i++)
-		seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n",
+		seq_printf(file, "\t raw:%02x bw20:%02x bw40:%02x\n",
 			   rp->ofdm[i].raw, rp->ofdm[i].bw20, rp->ofdm[i].bw40);
 	for (i = 0; i < 4; i++)
-		seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n",
+		seq_printf(file, "\t raw:%02x bw20:%02x bw40:%02x\n",
 			   rp->ht[i].raw, rp->ht[i].bw20, rp->ht[i].bw40);
 
 	seq_puts(file, "Per channel power:\n");
 	for (i = 0; i < 7; i++)
-		seq_printf(file, "\t tx_power  ch%u:%02hhx ch%u:%02hhx\n",
+		seq_printf(file, "\t tx_power  ch%u:%02x ch%u:%02x\n",
 			   i * 2 + 1, dev->ee->chan_pwr[i * 2],
 			   i * 2 + 2, dev->ee->chan_pwr[i * 2 + 1]);
 
@@ -112,8 +112,8 @@ mt7601u_eeprom_param_show(struct seq_file *file, void *data)
 		return 0;
 
 	seq_puts(file, "TSSI:\n");
-	seq_printf(file, "\t slope:%02hhx\n", td->slope);
-	seq_printf(file, "\t offset=%02hhx %02hhx %02hhx\n",
+	seq_printf(file, "\t slope:%02x\n", td->slope);
+	seq_printf(file, "\t offset=%02x %02x %02x\n",
 		   td->offset[0], td->offset[1], td->offset[2]);
 	seq_printf(file, "\t delta_off:%08x\n", td->tx0_delta_offset);