[V10,5/7] mtk-jpegenc: add jpeg encode worker interface
kyrie.wu
kyrie.wu at mediatek.com
Thu Jul 14 01:51:58 PDT 2022
On Tue, 2022-07-05 at 15:27 +0200, AngeloGioacchino Del Regno wrote:
> Il 27/06/22 04:56, Irui Wang ha scritto:
> > From: kyrie wu <kyrie.wu at mediatek.com>
> >
> > Add jpeg encoding worker to ensure that two HWs
> > run in parallel in MT8195.
> >
> > Signed-off-by: kyrie wu <kyrie.wu at mediatek.com>
> > ---
> > .../platform/mediatek/jpeg/mtk_jpeg_core.c | 208
> > ++++++++++++++++--
> > .../platform/mediatek/jpeg/mtk_jpeg_core.h | 30 ++-
> > .../platform/mediatek/jpeg/mtk_jpeg_enc_hw.c | 39 +++-
> > 3 files changed, 240 insertions(+), 37 deletions(-)
> >
> > diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
> > b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
> > index 0c5c85a112ca..544673a527a0 100644
> > --- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
> > +++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
>
> ..snip..
>
> > @@ -946,9 +1050,58 @@ static void mtk_jpeg_enc_device_run(void
> > *priv)
> > v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > v4l2_m2m_buf_done(src_buf, buf_state);
> > v4l2_m2m_buf_done(dst_buf, buf_state);
> > +getbuf_fail:
> > + atomic_inc(&jpeg->enchw_rdy);
> > + mtk_jpegenc_put_hw(jpeg, hw_id);
> > v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
> > }
> >
> > +static void mtk_jpeg_enc_device_run(void *priv)
> > +{
>
> That's not really the best thing to do here... if we're managing
> multi-core
> hardware, this function would be a one-liner and we would never see
> variable
> jpeg->is_jpgenc_multihw changing during runtime.
>
> At this point, we can reduce checks and improve human readability by
> simply
> having two separated functions for single-core vs multi-core...
>
> static void mtk_jpeg_singlecore_enc_dev_run(void *priv) { .... blah
> .... }
>
> and
>
> static void mtk_jpeg_multicore_enc_dev_run(void *priv)
> {
> struct mtk_jpeg_ctx *ctx = priv;
>
> queue_work(ctx->jpeg->workqueue, &ctx->jpeg_work);
> }
>
> Also because we're defining `.m2m_ops` into mt8195_jpegenc_drvdata,
> so it's
> going to be as trivial as defining a new m2m_ops for it:
>
> static const struct v4l2_m2m_ops mtk_jpeg_multicore_enc_m2m_ops = {
>
> .device_run = mtk_jpeg_multicore_enc_dev_run,
>
> };
>
> Please fix that :-)
Hello Angelo,
Thanks for your kind guidances, I will take your suggestion to fix it.
Kyrie.
>
> > + struct mtk_jpeg_ctx *ctx = priv;
> > + struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> > + struct vb2_v4l2_buffer *src_buf, *dst_buf;
> > + enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
> > + unsigned long flags;
> > + int ret;
> > +
> > + if (!jpeg->is_jpgenc_multihw) {
> > + src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
> > + dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
> > +
> > + ret = pm_runtime_resume_and_get(jpeg->dev);
> > + if (ret < 0)
> > + goto enc_end;
> > +
> > + schedule_delayed_work(&jpeg->job_timeout_work,
> > + msecs_to_jiffies(MTK_JPEG_HW_TIME
> > OUT_MSEC));
> > +
> > + spin_lock_irqsave(&jpeg->hw_lock, flags);
> > +
> > + /*
> > + * Resetting the hardware every frame is to ensure that
> > all the
> > + * registers are cleared. This is a hardware
> > requirement.
> > + */
> > + mtk_jpeg_enc_reset(jpeg->reg_base);
> > +
> > + mtk_jpeg_set_enc_src(ctx, jpeg->reg_base, &src_buf-
> > >vb2_buf);
> > + mtk_jpeg_set_enc_dst(ctx, jpeg->reg_base, &dst_buf-
> > >vb2_buf);
> > + mtk_jpeg_set_enc_params(ctx, jpeg->reg_base);
> > + mtk_jpeg_enc_start(jpeg->reg_base);
> > + spin_unlock_irqrestore(&jpeg->hw_lock, flags);
> > + return;
> > +
> > +enc_end:
> > + v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> > + v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > + v4l2_m2m_buf_done(src_buf, buf_state);
> > + v4l2_m2m_buf_done(dst_buf, buf_state);
> > + v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
> > + } else {
> > + queue_work(jpeg->workqueue, &ctx->jpeg_work);
> > + }
> > +}
> > +
> > static void mtk_jpeg_dec_device_run(void *priv)
> > {
> > struct mtk_jpeg_ctx *ctx = priv;
> > @@ -1211,6 +1364,9 @@ static int mtk_jpeg_open(struct file *file)
> > goto free;
> > }
> >
> > + if (jpeg->is_jpgenc_multihw)
> > + INIT_WORK(&ctx->jpeg_work, mtk_jpegenc_worker);
> > +
> > v4l2_fh_init(&ctx->fh, vfd);
> > file->private_data = &ctx->fh;
> > v4l2_fh_add(&ctx->fh);
> > @@ -1355,6 +1511,18 @@ static int mtk_jpeg_probe(struct
> > platform_device *pdev)
> > dev_err(&pdev->dev, "Failed to init clk\n");
> > goto err_clk_init;
> > }
> > + } else {
> > + if (of_property_read_bool(pdev->dev.of_node,
> > + "mediatek,jpegenc-multi-
> > core")) {
>
> This check is redundant (and will be wrong in the jpegdec series):
> you're entering
> this branch only `if (jpeg->is_jpgenc_multihw)`, and this is
> initialized a little
> earlier when reading the very same devicetree property.
>
> So, for this series, remove the redundant check; for the jpegdec
> series, don't
> recheck with of_property_read_bool, but check for `if (jpeg-
> >is_jpgenc_multihw)`
> and then theck for `if (jpeg->is_jpgdec_multihw)`.
This check will be removed, and I will take a new operations.
thanks.
>
> > + init_waitqueue_head(&jpeg->enc_hw_wq);
> > + jpeg->workqueue =
> > alloc_ordered_workqueue(MTK_JPEG_NAME,
> > + WQ_ME
> > M_RECLAIM
> > + |
> > WQ_FREEZABLE);
> > + if (!jpeg->workqueue) {
> > + ret = -EINVAL;
> > + goto err_alloc_workqueue;
> > + }
> > + }
> > }
> >
> > ret = v4l2_device_register(&pdev->dev, &jpeg->v4l2_dev);
> > @@ -1423,6 +1591,8 @@ static int mtk_jpeg_probe(struct
> > platform_device *pdev)
> >
> > err_clk_init:
> >
> > +err_alloc_workqueue:
> > +
>
> You aren't doing anything at all here, so this label is not required.
> Remove it.
OK, thanks.
>
> > err_req_irq:
> >
> > return ret;
> > diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.h
> > b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.h
> > index 55719bd1b0fb..2fc20c6e06f4 100644
> > --- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.h
> > +++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.h
> > @@ -75,6 +75,11 @@ struct mtk_jpeg_variant {
> > u32 cap_q_default_fourcc;
> > };
> >
> > +enum mtk_jpeg_hw_state {
> > + MTK_JPEG_HW_IDLE = 0,
> > + MTK_JPEG_HW_BUSY = 1,
> > +};
> > +
> > struct mtk_jpeg_hw_param {
> > struct vb2_v4l2_buffer *src_buffer;
> > struct vb2_v4l2_buffer *dst_buffer;
> > @@ -97,12 +102,17 @@ struct mtk_jpegenc_clk {
> >
> > /**
> > * struct mtk_jpegenc_comp_dev - JPEG COREX abstraction
> > - * @dev: JPEG device
> > - * @plat_dev: platform device data
> > - * @reg_base: JPEG registers mapping
> > - * @master_dev: mtk_jpeg_dev device
> > - * @pm: mtk_jpegenc_pm
> > - * @jpegenc_irq: jpeg encode irq num
> > + * @dev: JPEG device
> > + * @plat_dev: platform device data
> > + * @reg_base: JPEG registers mapping
> > + * @master_dev: mtk_jpeg_dev device
> > + * @venc_clk: mtk_jpegenc_clk
> > + * @jpegenc_irq: jpeg encode irq num
> > + * @job_timeout_work: handle jpeg encode work
> > + * @hw_param: record hw param
> > + * @hw_rdy: record hw ready
> > + * @hw_state: record hw state
> > + * @hw_lock: spinlock protecting the hw device
> > resource
> > */
> > struct mtk_jpegenc_comp_dev {
> > struct device *dev;
> > @@ -114,6 +124,9 @@ struct mtk_jpegenc_comp_dev {
> > int hw_id;
> > struct delayed_work job_timeout_work;
> > struct mtk_jpeg_hw_param hw_param;
> > + enum mtk_jpeg_hw_state hw_state;
> > + //spinlock protecting the hw device resource
> > + spinlock_t hw_lock;
> > };
> >
> > /**
> > @@ -146,6 +159,8 @@ struct mtk_jpeg_dev {
> > void __iomem *reg_encbase[MTK_JPEGENC_HW_MAX];
> > struct mtk_jpegenc_comp_dev *enc_hw_dev[MTK_JPEGENC_HW_MAX];
> > bool is_jpgenc_multihw;
> > + wait_queue_head_t enc_hw_wq;
> > + atomic_t enchw_rdy;
> > };
> >
> > /**
> > @@ -204,6 +219,9 @@ struct mtk_jpeg_ctx {
> > u8 enc_quality;
> > u8 restart_interval;
> > struct v4l2_ctrl_handler ctrl_hdl;
> > +
> > + struct work_struct jpeg_work;
> > + u32 total_frame_num;
> > };
> >
> > #endif /* _MTK_JPEG_CORE_H */
> > diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_enc_hw.c
> > b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_enc_hw.c
> > index bea62013ce7d..8e1840137c34 100644
> > --- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_enc_hw.c
> > +++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_enc_hw.c
> > @@ -192,6 +192,7 @@ static void mtk_jpegenc_timeout_work(struct
> > work_struct *work)
> > container_of(dly_work,
> > struct mtk_jpegenc_comp_dev,
> > job_timeout_work);
> > + struct mtk_jpeg_dev *master_jpeg = cjpeg->master_dev;
> > enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
> > struct vb2_v4l2_buffer *src_buf, *dst_buf;
> >
> > @@ -202,6 +203,9 @@ static void mtk_jpegenc_timeout_work(struct
> > work_struct *work)
> > mtk_jpeg_enc_reset(cjpeg->reg_base);
> > clk_disable_unprepare(cjpeg->venc_clk.clks->clk);
> > pm_runtime_put(cjpeg->dev);
> > + cjpeg->hw_state = MTK_JPEG_HW_IDLE;
> > + atomic_inc(&master_jpeg->enchw_rdy);
> > + wake_up(&master_jpeg->enc_hw_wq);
> > v4l2_m2m_buf_done(src_buf, buf_state);
> > }
> >
> > @@ -218,30 +222,37 @@ static irqreturn_t
> > mtk_jpegenc_hw_irq_handler(int irq, void *priv)
> >
> > cancel_delayed_work(&jpeg->job_timeout_work);
> >
> > + ctx = jpeg->hw_param.curr_ctx;
> > + src_buf = jpeg->hw_param.src_buffer;
> > + dst_buf = jpeg->hw_param.dst_buffer;
> > + v4l2_m2m_buf_copy_metadata(src_buf, dst_buf, true);
> > +
> > irq_status = readl(jpeg->reg_base + JPEG_ENC_INT_STS) &
> > JPEG_ENC_INT_STATUS_MASK_ALLIRQ;
> > if (irq_status)
> > writel(0, jpeg->reg_base + JPEG_ENC_INT_STS);
> > - if (!(irq_status & JPEG_ENC_INT_STATUS_DONE))
> > - return IRQ_NONE;
> > -
> > - ctx = v4l2_m2m_get_curr_priv(master_jpeg->m2m_dev);
> > - if (!ctx) {
> > - v4l2_err(&master_jpeg->v4l2_dev, "Context is NULL\n");
> > - return IRQ_HANDLED;
> > + if (!(irq_status & JPEG_ENC_INT_STATUS_DONE)) {
> > + dev_err(jpeg->dev, " Not JPEG_ENC_INT_STATUS_DONE\n");
>
> Please be more descriptive in error messages. Also, should this
> really be
> a dev_err?!?
maybe dev_warn is right, I will fix it.
>
> > + goto irq_handled;
> > }
> >
> > - src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> > - dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > - v4l2_m2m_buf_copy_metadata(src_buf, dst_buf, true);
> > -
> > result_size = mtk_jpeg_enc_get_file_size(jpeg->reg_base);
> > vb2_set_plane_payload(&dst_buf->vb2_buf, 0, result_size);
> > +
> > +irq_handled:
> > buf_state = VB2_BUF_STATE_DONE;
> > v4l2_m2m_buf_done(src_buf, buf_state);
> > v4l2_m2m_buf_done(dst_buf, buf_state);
> > - v4l2_m2m_job_finish(master_jpeg->m2m_dev, ctx->fh.m2m_ctx);
> > pm_runtime_put(ctx->jpeg->dev);
> > + clk_disable_unprepare(jpeg->venc_clk.clks->clk);
> > + if (!list_empty(&ctx->fh.m2m_ctx->out_q_ctx.rdy_queue) ||
> > + !list_empty(&ctx->fh.m2m_ctx->cap_q_ctx.rdy_queue)) {
> > + queue_work(master_jpeg->workqueue, &ctx->jpeg_work);
> > + }
> > +
> > + jpeg->hw_state = MTK_JPEG_HW_IDLE;
> > + wake_up(&master_jpeg->enc_hw_wq);
> > + atomic_inc(&master_jpeg->enchw_rdy);
> >
> > return IRQ_HANDLED;
> > }
> > @@ -294,6 +305,10 @@ static int mtk_jpegenc_hw_probe(struct
> > platform_device *pdev)
> > dev->plat_dev = pdev;
> > dev->dev = &pdev->dev;
> >
> > + atomic_set(&master_dev->enchw_rdy, MTK_JPEGENC_HW_MAX);
> > + spin_lock_init(&dev->hw_lock);
> > + dev->hw_state = MTK_JPEG_HW_IDLE;
> > +
> > INIT_DELAYED_WORK(&dev->job_timeout_work,
> > mtk_jpegenc_timeout_work);
> >
>
>
More information about the Linux-mediatek
mailing list