[PATCH v24 07/10] soc: mediatek: mmsys: add mmsys for support 64 reset bits

Nancy.Lin nancy.lin at mediatek.com
Sun Jul 10 23:01:09 PDT 2022


Hi Matthias,

Thanks for the review.

On Fri, 2022-07-08 at 17:42 +0200, Matthias Brugger wrote:
> 
> On 22/06/2022 15:08, Nancy.Lin wrote:
> > Add mmsys for support 64 reset bits. It is a preparation for MT8195
> > vdosys1 HW reset. MT8195 vdosys1 has more than 32 reset bits.
> > 
> > 1. Add the number of reset bits in mmsys private data
> > 2. move the whole "reset register code section" behind the
> > "get mmsys->data" code section for getting the num_resets in mmsys-
> > >data.
> > 
> > Signed-off-by: Nancy.Lin <nancy.lin at mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno at collabora.com>
> > Reviewed-by: CK Hu <ck.hu at mediatek.com>
> > Tested-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
> > ---
> >   drivers/soc/mediatek/mtk-mmsys.c | 35 ++++++++++++++++++++-------
> > -----
> >   drivers/soc/mediatek/mtk-mmsys.h |  1 +
> >   2 files changed, 23 insertions(+), 13 deletions(-)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-mmsys.c
> > b/drivers/soc/mediatek/mtk-mmsys.c
> > index 16be77d5acac..47b72ae72cc2 100644
> > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > @@ -20,6 +20,8 @@
> >   #include "mt8195-mmsys.h"
> >   #include "mt8365-mmsys.h"
> >   
> > +#define MMSYS_SW_RESET_PER_REG 32
> > +
> >   static const struct mtk_mmsys_driver_data
> > mt2701_mmsys_driver_data = {
> >   	.clk_driver = "clk-mt2701-mm",
> >   	.routes = mmsys_default_routing_table,
> > @@ -86,6 +88,7 @@ static const struct mtk_mmsys_driver_data
> > mt8173_mmsys_driver_data = {
> >   	.routes = mmsys_default_routing_table,
> >   	.num_routes = ARRAY_SIZE(mmsys_default_routing_table),
> >   	.sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> > +	.num_resets = 32,
> >   };
> >   
> >   static const struct mtk_mmsys_match_data mt8173_mmsys_match_data
> > = {
> > @@ -100,6 +103,7 @@ static const struct mtk_mmsys_driver_data
> > mt8183_mmsys_driver_data = {
> >   	.routes = mmsys_mt8183_routing_table,
> >   	.num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
> >   	.sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> > +	.num_resets = 32,
> >   };
> >   
> >   static const struct mtk_mmsys_match_data mt8183_mmsys_match_data
> > = {
> > @@ -114,6 +118,7 @@ static const struct mtk_mmsys_driver_data
> > mt8186_mmsys_driver_data = {
> >   	.routes = mmsys_mt8186_routing_table,
> >   	.num_routes = ARRAY_SIZE(mmsys_mt8186_routing_table),
> >   	.sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
> > +	.num_resets = 32,
> >   };
> >   
> >   static const struct mtk_mmsys_match_data mt8186_mmsys_match_data
> > = {
> > @@ -288,10 +293,14 @@ static int mtk_mmsys_reset_update(struct
> > reset_controller_dev *rcdev, unsigned l
> >   {
> >   	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys,
> > rcdev);
> >   	unsigned long flags;
> > +	u32 offset;
> > +
> > +	offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32);
> > +	id = id % MMSYS_SW_RESET_PER_REG;
> >   
> >   	spin_lock_irqsave(&mmsys->lock, flags);
> >   
> > -	mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset,
> > BIT(id),
> > +	mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset +
> > offset, BIT(id),
> >   			      assert ? 0 : BIT(id), NULL);
> 
> reg = mmsys->data->sw0_rst_offset + offset;
> mtk_mmsys_update_bits(mmsys, reg, BIT(id),
>                        assert ? 0 : BIT(id), NULL);
> 
> Other then that, patch looks good.
> By the way setting val depending on assert in the function call gets
> (for me) 
> hard to read, as I said earlier.
> 
> Regards,
> Matthias
> 
OK, I will add reg variable and modify it as you said in [1].

[1] 
https://patchwork.kernel.org/project/linux-mediatek/patch/20220622130824.29143-5-nancy.lin@mediatek.com/

BRs,
Nancy

> >   
> >   	spin_unlock_irqrestore(&mmsys->lock, flags);
> > @@ -349,18 +358,6 @@ static int mtk_mmsys_probe(struct
> > platform_device *pdev)
> >   		return ret;
> >   	}
> >   
> > -	spin_lock_init(&mmsys->lock);
> > -
> > -	mmsys->rcdev.owner = THIS_MODULE;
> > -	mmsys->rcdev.nr_resets = 32;
> > -	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> > -	mmsys->rcdev.of_node = pdev->dev.of_node;
> > -	ret = devm_reset_controller_register(&pdev->dev, &mmsys-
> > >rcdev);
> > -	if (ret) {
> > -		dev_err(&pdev->dev, "Couldn't register mmsys reset
> > controller: %d\n", ret);
> > -		return ret;
> > -	}
> > -
> >   	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >   	if (!res) {
> >   		dev_err(dev, "Couldn't get mmsys resource\n");
> > @@ -382,6 +379,18 @@ static int mtk_mmsys_probe(struct
> > platform_device *pdev)
> >   		mmsys->data = match_data->drv_data[0];
> >   	}
> >   
> > +	spin_lock_init(&mmsys->lock);
> > +
> > +	mmsys->rcdev.owner = THIS_MODULE;
> > +	mmsys->rcdev.nr_resets = mmsys->data->num_resets;
> > +	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> > +	mmsys->rcdev.of_node = pdev->dev.of_node;
> > +	ret = devm_reset_controller_register(&pdev->dev, &mmsys-
> > >rcdev);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Couldn't register mmsys reset
> > controller: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> >   #if IS_REACHABLE(CONFIG_MTK_CMDQ)
> >   	ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
> >   	if (ret)
> > diff --git a/drivers/soc/mediatek/mtk-mmsys.h
> > b/drivers/soc/mediatek/mtk-mmsys.h
> > index f01ba206481d..20a271b80b3b 100644
> > --- a/drivers/soc/mediatek/mtk-mmsys.h
> > +++ b/drivers/soc/mediatek/mtk-mmsys.h
> > @@ -92,6 +92,7 @@ struct mtk_mmsys_driver_data {
> >   	const struct mtk_mmsys_routes *routes;
> >   	const unsigned int num_routes;
> >   	const u16 sw0_rst_offset;
> > +	const u32 num_resets;
> >   };
> >   
> >   struct mtk_mmsys_match_data {




More information about the Linux-mediatek mailing list