[RESEND v4 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8188
kewei.xu at mediatek.com
kewei.xu at mediatek.com
Thu Jul 7 20:47:58 PDT 2022
From: Kewei Xu <kewei.xu at mediatek.com>
Add i2c compatible for MT8188. Compare to MT8192 i2c controller,
The MT8188 i2c OFFSET_SLAVE_ADDR register changed from 0x04 to 0x94.
Signed-off-by: Kewei Xu <kewei.xu at mediatek.com>
---
v4: no changes
V3: no changes
V2: added mt_i2c_regs_v3[] to replace slave_addr_version.
---
drivers/i2c/busses/i2c-mt65xx.c | 43 +++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 8e6985354fd5..70aff42adf5d 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -229,6 +229,35 @@ static const u16 mt_i2c_regs_v2[] = {
[OFFSET_DCM_EN] = 0xf88,
};
+static const u16 mt_i2c_regs_v3[] = {
+ [OFFSET_DATA_PORT] = 0x0,
+ [OFFSET_SLAVE_ADDR] = 0x94,
+ [OFFSET_INTR_MASK] = 0x8,
+ [OFFSET_INTR_STAT] = 0xc,
+ [OFFSET_CONTROL] = 0x10,
+ [OFFSET_TRANSFER_LEN] = 0x14,
+ [OFFSET_TRANSAC_LEN] = 0x18,
+ [OFFSET_DELAY_LEN] = 0x1c,
+ [OFFSET_TIMING] = 0x20,
+ [OFFSET_START] = 0x24,
+ [OFFSET_EXT_CONF] = 0x28,
+ [OFFSET_LTIMING] = 0x2c,
+ [OFFSET_HS] = 0x30,
+ [OFFSET_IO_CONFIG] = 0x34,
+ [OFFSET_FIFO_ADDR_CLR] = 0x38,
+ [OFFSET_SDA_TIMING] = 0x3c,
+ [OFFSET_TRANSFER_LEN_AUX] = 0x44,
+ [OFFSET_CLOCK_DIV] = 0x48,
+ [OFFSET_SOFTRESET] = 0x50,
+ [OFFSET_MULTI_DMA] = 0x8c,
+ [OFFSET_SCL_MIS_COMP_POINT] = 0x90,
+ [OFFSET_DEBUGSTAT] = 0xe4,
+ [OFFSET_DEBUGCTRL] = 0xe8,
+ [OFFSET_FIFO_STAT] = 0xf4,
+ [OFFSET_FIFO_THRESH] = 0xf8,
+ [OFFSET_DCM_EN] = 0xf88,
+};
+
struct mtk_i2c_compatible {
const struct i2c_adapter_quirks *quirks;
const u16 *regs;
@@ -442,6 +471,19 @@ static const struct mtk_i2c_compatible mt8186_compat = {
.max_dma_support = 36,
};
+static const struct mtk_i2c_compatible mt8188_compat = {
+ .regs = mt_i2c_regs_v3,
+ .pmic_i2c = 0,
+ .dcm = 0,
+ .auto_restart = 1,
+ .aux_len_reg = 1,
+ .timing_adjust = 1,
+ .dma_sync = 0,
+ .ltiming_adjust = 1,
+ .apdma_sync = 1,
+ .max_dma_support = 36,
+};
+
static const struct mtk_i2c_compatible mt8192_compat = {
.quirks = &mt8183_i2c_quirks,
.regs = mt_i2c_regs_v2,
@@ -465,6 +507,7 @@ static const struct of_device_id mtk_i2c_of_match[] = {
{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
{ .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
{ .compatible = "mediatek,mt8186-i2c", .data = &mt8186_compat },
+ { .compatible = "mediatek,mt8188-i2c", .data = &mt8188_compat },
{ .compatible = "mediatek,mt8192-i2c", .data = &mt8192_compat },
{}
};
--
2.18.0
More information about the Linux-mediatek
mailing list