[PATCH RFC net-next 5/5] net: dsa: always use phylink for CPU and DSA ports

[Russell King (Oracle)]

On Wed, Jul 06, 2022 at 05:24:09PM +0100, Russell King (Oracle) wrote:
> On Wed, Jul 06, 2022 at 01:26:21PM +0300, Vladimir Oltean wrote:
> > Can we please limit phylink_set_max_link_speed() to just the CPU ports
> > where a fixed-link property is also missing, not just a phy-handle?
> > Although to be entirely correct, we can also have MLO_AN_INBAND, which
> > wouldn't be covered by these 2 checks and would still represent a valid
> > DT binding.
> 
> phylink_set_max_fixed_link() already excludes itself:
> 
>         if (pl->cfg_link_an_mode != MLO_AN_PHY || pl->phydev || pl->sfp_bus)
>                 return -EBUSY;
> 
> intentionally so that if there is anything specified for the port, be
> that a fixed link or in-band, then phylink_set_max_fixed_link() errors
> out with -EBUSY.
> 
> The only case that it can't detect is if there is a PHY that may be
> added to phylink at a later time, and that is what the check above
> is for.

I've updated the function description to mention this detail:

+/**
+ * phylink_set_max_fixed_link() - set a fixed link configuration for phylink
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Set a maximum speed fixed-link configuration for the chosen interface mode
+ * and MAC capabilities for the phylink instance if the instance has not
+ * already been configured with a SFP, fixed link, or in-band AN mode. If the
+ * interface mode is PHY_INTERFACE_MODE_NA, then search the supported
+ * interfaces bitmap for the first interface that gives the fastest supported
+ * speed.

Does this address your concern?

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!