[PATCH v1 02/16] dt-bindings: memory: mediatek: Update condition for mt8195 smi node

[Matthias Brugger]

On 04/07/2022 14:36, Krzysztof Kozlowski wrote:
> On 04/07/2022 12:00, Tinghan Shen wrote:
>> The max clock items for the dts node with compatible
>> 'mediatek,mt8195-smi-sub-common' should be 3.
>>
>> However, the dtbs_check of such node will get following message,
>> arch/arm64/boot/dts/mediatek/mt8195-evb.dtb: smi at 14010000: clock-names: ['apb', 'smi', 'gals0'] is too long
>>           From schema: Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
>>
>> Remove the last 'else' checking to fix this error.
> 
> Missing fixes tag.
> 

 From my understanding, fixes tags are for patches that fix bugs (hw is not 
working etc) and not a warning message from dtbs_check. So my point of view 
would be to not add a fixes tag here.

Regards,
Matthias

>>
>> Signed-off-by: Tinghan Shen <tinghan.shen at mediatek.com>
>> ---
>>   .../memory-controllers/mediatek,smi-common.yaml        | 10 +++++++++-
>>   1 file changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
>> index a98b359bf909..e5f553e2e12a 100644
>> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
>> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
>> @@ -143,7 +143,15 @@ allOf:
>>               - const: gals0
>>               - const: gals1
>>   
>> -    else:  # for gen2 HW that don't have gals
>> +  - if:  # for gen2 HW that don't have gals
>> +      properties:
>> +        compatible:
>> +          enum:
>> +            - mediatek,mt2712-smi-common
>> +            - mediatek,mt8167-smi-common
>> +            - mediatek,mt8173-smi-common
>> +
> 
> Without looking at the code, it's impossible to understand what you are
> doing here. The commit msg says one, but you are doing something else.
> 
> Write commit msg explaining what you want to achieve and what you are doing.
> 
> 
> Best regards,
> Krzysztof