[PATCH v2 4/4] arm64: dts: mediatek: mt8195: enable usb remote wakeup

[Chunfeng Yun]

Enable USB remote wakeup of all four xHCI controllers

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2: based on new mt8195 base dts, no need add usb nodes

Note:

 depend on the reviewing patch:

[v9,3/3] arm64: dts: Add mediatek SoC mt8195 and evaluation board
https://patchwork.kernel.org/patch/12711296

---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 240a21708806..444e5448c9b1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -573,6 +573,8 @@
 				 <&apmixedsys CLK_APMIXED_USB1PLL>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -636,6 +638,8 @@
 				 <&apmixedsys CLK_APMIXED_USB1PLL>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 104>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -655,6 +659,8 @@
 				 <&topckgen CLK_TOP_SSUSB_P2_REF>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -674,6 +680,8 @@
 				 <&topckgen CLK_TOP_SSUSB_P3_REF>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+			wakeup-source;
 			/* This controller is connected with a BT device.
 			 * Disable usb2 lpm to prevent konwn issues.
 			 */
-- 
2.18.0