[PATCH v11 2/3] dts: arm64: mt8183: add Mediatek MDP3 nodes

[AngeloGioacchino Del Regno]

Il 25/01/22 09:20, moudy ho ha scritto:
> On Fri, 2022-01-21 at 12:58 +0100, AngeloGioacchino Del Regno wrote:
>> Il 05/01/22 10:37, Moudy Ho ha scritto:
>>> Add device nodes for Media Data Path 3 (MDP3) modules.
>>>
>>> Signed-off-by: Moudy Ho <moudy.ho at mediatek.com>
>>> ---
>>>    arch/arm64/boot/dts/mediatek/mt8183.dtsi | 108
>>> ++++++++++++++++++++++-
>>>    1 file changed, 107 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>> b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>> index ba4584faca5a..b872ef1ff6b3 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>> @@ -1325,6 +1325,79 @@
>>>    			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX
>>> 0 0x1000>;
>>>    		};
>>>    
>>> +		mdp3_rdma0: mdp3_rdma0 at 14001000 {
>>> +			compatible = "mediatek,mt8183-mdp3",
>>> +				     "mediatek,mt8183-mdp3-rdma0";
>>> +			mediatek,scp = <&scp>;
>>> +			mediatek,mdp3-comps = "mediatek,mt8183-mdp3-
>>> dl1",
>>> +					      "mediatek,mt8183-mdp3-
>>> dl2",
>>> +					      "mediatek,mt8183-mdp3-
>>> path1",
>>> +					      "mediatek,mt8183-mdp3-
>>> path2",
>>> +					      "mediatek,mt8183-mdp3-
>>> imgi",
>>> +					      "mediatek,mt8183-mdp3-
>>> exto";
>>> +			reg = <0 0x14001000 0 0x1000>,
>>> +			      <0 0x14000000 0 0x1000>,
>>> +			      <0 0x14005000 0 0x1000>,
>>> +			      <0 0x14006000 0 0x1000>,
>>> +			      <0 0x15020000 0 0x1000>;
>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX
>>> 0x1000 0x1000>,
>>> +						  <&gce SUBSYS_1400XXXX
>>> 0 0x1000>,
>>> +						  <&gce SUBSYS_1400XXXX
>>> 0x5000 0x1000>,
>>> +						  <&gce SUBSYS_1400XXXX
>>> 0x6000 0x1000>,
>>> +						  <&gce SUBSYS_1502XXXX
>>> 0 0x1000>;
>>> +			power-domains = <&spm
>>> MT8183_POWER_DOMAIN_DISP>;
>>> +			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
>>> +				 <&mmsys CLK_MM_MDP_RSZ1>,
>>> +				 <&mmsys CLK_MM_MDP_DL_TXCK>,
>>> +				 <&mmsys CLK_MM_MDP_DL_RX>,
>>> +				 <&mmsys CLK_MM_IPU_DL_TXCK>,
>>> +				 <&mmsys CLK_MM_IPU_DL_RX>;
>>> +			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
>>> +			mediatek,mmsys = <&mmsys>;
>>> +			mediatek,mm-mutex = <&mutex>;
>>> +			mediatek,mailbox-gce = <&gce>;
>>> +			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
>>> +				 <&gce 21 CMDQ_THR_PRIO_LOWEST>,
>>> +				 <&gce 22 CMDQ_THR_PRIO_LOWEST>,
>>> +				 <&gce 23 CMDQ_THR_PRIO_LOWEST>;
>>
>> Hello Moudy,
>> the mboxes for gce 21, 22, 23 are missing the third cell. Please fix.
>>
>> Regards,
>> Angelo
> 
> Hi Angelo,
> Thanks for the reminder, but I'm a bit confused, the previous
> version(v10) mentioned that the current upstream mbox has only 2
> cells.
> So I should follow this rule to remove the extra 0 in the first item as
> follows:
>   +			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
>   +				 <&gce 21 CMDQ_THR_PRIO_LOWEST>,
>   +				 <&gce 22 CMDQ_THR_PRIO_LOWEST>,
>   +				 <&gce 23 CMDQ_THR_PRIO_LOWEST>;
> 
> Thanks,
> Moudy Ho

Hello Moudy,
I'm sorry for this confusion and you are totally right in the proposed solution,
which is the exact opposite of what I said.

Thanks for understanding,
Angelo

>>
>>> +			gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
>>> +				     <&gce 0x14010000 SUBSYS_1401XXXX>,
>>> +				     <&gce 0x14020000 SUBSYS_1402XXXX>,
>>> +				     <&gce 0x15020000 SUBSYS_1502XXXX>;
>>> +		};
>>> +
>>
>>
>