[PATCH net-next v1 3/9] net: ethernet: mtk-star-emac: add support for MT8365 SoC

[Bartosz Golaszewski]

On Thu, Jan 20, 2022 at 8:02 AM Biao Huang <biao.huang at mediatek.com> wrote:
>
> Add Ethernet driver support for MT8365 SoC.
>
> Signed-off-by: Biao Huang <biao.huang at mediatek.com>
> Signed-off-by: Yinghua Pan <ot_yinghua.pan at mediatek.com>
> Signed-off-by: Fabien Parent <fparent at baylibre.com>
> ---
>  drivers/net/ethernet/mediatek/mtk_star_emac.c | 75 ++++++++++++++++---
>  1 file changed, 64 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/ethernet/mediatek/mtk_star_emac.c b/drivers/net/ethernet/mediatek/mtk_star_emac.c
> index 7c2af775d601..403439782db9 100644
> --- a/drivers/net/ethernet/mediatek/mtk_star_emac.c
> +++ b/drivers/net/ethernet/mediatek/mtk_star_emac.c
> @@ -151,6 +151,7 @@ static const char *const mtk_star_clk_names[] = { "core", "reg", "trans" };
>  #define MTK_STAR_REG_MAC_CLK_CONF              0x00ac
>  #define MTK_STAR_MSK_MAC_CLK_CONF              GENMASK(7, 0)
>  #define MTK_STAR_BIT_CLK_DIV_10                        0x0a
> +#define MTK_STAR_BIT_CLK_DIV_50                        0x32
>
>  /* Counter registers. */
>  #define MTK_STAR_REG_C_RXOKPKT                 0x0100
> @@ -183,9 +184,11 @@ static const char *const mtk_star_clk_names[] = { "core", "reg", "trans" };
>  #define MTK_STAR_REG_C_RX_TWIST                        0x0218
>
>  /* Ethernet CFG Control */
> -#define MTK_PERICFG_REG_NIC_CFG_CON            0x03c4
> -#define MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII    GENMASK(3, 0)
> -#define MTK_PERICFG_BIT_NIC_CFG_CON_RMII       BIT(0)
> +#define MTK_PERICFG_REG_NIC_CFG0_CON           0x03c4
> +#define MTK_PERICFG_REG_NIC_CFG1_CON           0x03c8
> +#define MTK_PERICFG_REG_NIC_CFG_CON_V2         0x0c10
> +#define MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF   GENMASK(3, 0)
> +#define MTK_PERICFG_BIT_NIC_CFG_CON_RMII       1
>
>  /* Represents the actual structure of descriptors used by the MAC. We can
>   * reuse the same structure for both TX and RX - the layout is the same, only
> @@ -234,6 +237,7 @@ struct mtk_star_ring {
>  };
>
>  struct mtk_star_compat {
> +       int (*set_interface_mode)(struct net_device *ndev);
>         unsigned char bit_clk_div;
>  };
>
> @@ -909,13 +913,6 @@ static void mtk_star_init_config(struct mtk_star_priv *priv)
>                            priv->compat_data->bit_clk_div);
>  }
>
> -static void mtk_star_set_mode_rmii(struct mtk_star_priv *priv)
> -{
> -       regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG_CON,
> -                          MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII,
> -                          MTK_PERICFG_BIT_NIC_CFG_CON_RMII);
> -}
> -
>  static int mtk_star_enable(struct net_device *ndev)
>  {
>         struct mtk_star_priv *priv = netdev_priv(ndev);
> @@ -1531,7 +1528,13 @@ static int mtk_star_probe(struct platform_device *pdev)
>                 return -ENODEV;
>         }
>
> -       mtk_star_set_mode_rmii(priv);
> +       if (priv->compat_data->set_interface_mode) {
> +               ret = priv->compat_data->set_interface_mode(ndev);
> +               if (ret) {
> +                       dev_err(dev, "Failed to set phy interface, err = %d\n", ret);
> +                       return -EINVAL;
> +               }
> +       }

Shouldn't you still call mtk_star_set_mode_rmii(priv) if there's no callback?

>
>         ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
>         if (ret) {
> @@ -1564,10 +1567,58 @@ static int mtk_star_probe(struct platform_device *pdev)
>         return devm_register_netdev(dev, ndev);
>  }
>
> +static int mt8516_set_interface_mode(struct net_device *ndev)
> +{
> +       struct mtk_star_priv *priv = netdev_priv(ndev);
> +       struct device *dev = mtk_star_get_dev(priv);
> +       unsigned int intf_val = 0;

No need to initialize.

> +
> +       switch (priv->phy_intf) {
> +       case PHY_INTERFACE_MODE_RMII:
> +               intf_val = MTK_PERICFG_BIT_NIC_CFG_CON_RMII;
> +               break;
> +       default:
> +               dev_err(dev, "This interface not supported\n");
> +               return -EINVAL;
> +       }
> +
> +       regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG0_CON,
> +                          MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF,
> +                          intf_val);
> +       return 0;

You can directly return regmap_update_bits().

> +}
> +
> +static int mt8365_set_interface_mode(struct net_device *ndev)
> +{
> +       struct mtk_star_priv *priv = netdev_priv(ndev);
> +       struct device *dev = mtk_star_get_dev(priv);
> +       unsigned int intf_val = 0;
> +
> +       switch (priv->phy_intf) {
> +       case PHY_INTERFACE_MODE_RMII:
> +               intf_val = MTK_PERICFG_BIT_NIC_CFG_CON_RMII;
> +               break;
> +       default:
> +               dev_err(dev, "This interface not supported\n");
> +               return -EINVAL;
> +       }
> +
> +       regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG_CON_V2,
> +                          MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF,
> +                          intf_val);
> +       return 0;
> +}

Same as above.

> +
>  static struct mtk_star_compat mtk_star_mt8516_compat = {
> +       .set_interface_mode = mt8516_set_interface_mode,
>         .bit_clk_div = MTK_STAR_BIT_CLK_DIV_10,
>  };
>
> +static struct mtk_star_compat mtk_star_mt8365_compat = {
> +       .set_interface_mode = mt8365_set_interface_mode,
> +       .bit_clk_div = MTK_STAR_BIT_CLK_DIV_50,
> +};
> +
>  static const struct of_device_id mtk_star_of_match[] = {
>         { .compatible = "mediatek,mt8516-eth",
>           .data = &mtk_star_mt8516_compat },
> @@ -1575,6 +1626,8 @@ static const struct of_device_id mtk_star_of_match[] = {
>           .data = &mtk_star_mt8516_compat },
>         { .compatible = "mediatek,mt8175-eth",
>           .data = &mtk_star_mt8516_compat },
> +       { .compatible = "mediatek,mt8365-eth",
> +         .data = &mtk_star_mt8365_compat },
>         { }
>  };
>  MODULE_DEVICE_TABLE(of, mtk_star_of_match);
> --
> 2.25.1
>

Bart