[PATCH] PCI: mediatek: Change MSI interrupt processing sequence

[qizhong cheng]

As an edge-triggered interrupts, its interrupt status should be cleared
before dispatch to the handler of device.

Signed-off-by: qizhong cheng <qizhong.cheng at mediatek.com>
---
 drivers/pci/controller/pcie-mediatek.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index 2f3f974977a3..705ea33758b1 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -624,12 +624,12 @@ static void mtk_pcie_intr_handler(struct irq_desc *desc)
 		if (status & MSI_STATUS){
 			unsigned long imsi_status;
 
+			/* Clear MSI interrupt status */
+			writel(MSI_STATUS, port->base + PCIE_INT_STATUS);
 			while ((imsi_status = readl(port->base + PCIE_IMSI_STATUS))) {
 				for_each_set_bit(bit, &imsi_status, MTK_MSI_IRQS_NUM)
 					generic_handle_domain_irq(port->inner_domain, bit);
 			}
-			/* Clear MSI interrupt status */
-			writel(MSI_STATUS, port->base + PCIE_INT_STATUS);
 		}
 	}
 
-- 
2.25.1