[PATCH v11 2/3] dts: arm64: mt8183: add Mediatek MDP3 nodes

[AngeloGioacchino Del Regno]

Il 05/01/22 10:37, Moudy Ho ha scritto:
> Add device nodes for Media Data Path 3 (MDP3) modules.
> 
> Signed-off-by: Moudy Ho <moudy.ho at mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8183.dtsi | 108 ++++++++++++++++++++++-
>   1 file changed, 107 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index ba4584faca5a..b872ef1ff6b3 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -1325,6 +1325,79 @@
>   			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
>   		};
>   
> +		mdp3_rdma0: mdp3_rdma0 at 14001000 {
> +			compatible = "mediatek,mt8183-mdp3",
> +				     "mediatek,mt8183-mdp3-rdma0";
> +			mediatek,scp = <&scp>;
> +			mediatek,mdp3-comps = "mediatek,mt8183-mdp3-dl1",
> +					      "mediatek,mt8183-mdp3-dl2",
> +					      "mediatek,mt8183-mdp3-path1",
> +					      "mediatek,mt8183-mdp3-path2",
> +					      "mediatek,mt8183-mdp3-imgi",
> +					      "mediatek,mt8183-mdp3-exto";
> +			reg = <0 0x14001000 0 0x1000>,
> +			      <0 0x14000000 0 0x1000>,
> +			      <0 0x14005000 0 0x1000>,
> +			      <0 0x14006000 0 0x1000>,
> +			      <0 0x15020000 0 0x1000>;
> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>,
> +						  <&gce SUBSYS_1400XXXX 0 0x1000>,
> +						  <&gce SUBSYS_1400XXXX 0x5000 0x1000>,
> +						  <&gce SUBSYS_1400XXXX 0x6000 0x1000>,
> +						  <&gce SUBSYS_1502XXXX 0 0x1000>;
> +			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> +			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
> +				 <&mmsys CLK_MM_MDP_RSZ1>,
> +				 <&mmsys CLK_MM_MDP_DL_TXCK>,
> +				 <&mmsys CLK_MM_MDP_DL_RX>,
> +				 <&mmsys CLK_MM_IPU_DL_TXCK>,
> +				 <&mmsys CLK_MM_IPU_DL_RX>;
> +			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
> +			mediatek,mmsys = <&mmsys>;
> +			mediatek,mm-mutex = <&mutex>;
> +			mediatek,mailbox-gce = <&gce>;
> +			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
> +				 <&gce 21 CMDQ_THR_PRIO_LOWEST>,
> +				 <&gce 22 CMDQ_THR_PRIO_LOWEST>,
> +				 <&gce 23 CMDQ_THR_PRIO_LOWEST>;

Hello Moudy,
the mboxes for gce 21, 22, 23 are missing the third cell. Please fix.

Regards,
Angelo

> +			gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> +				     <&gce 0x14010000 SUBSYS_1401XXXX>,
> +				     <&gce 0x14020000 SUBSYS_1402XXXX>,
> +				     <&gce 0x15020000 SUBSYS_1502XXXX>;
> +		};
> +