[PATCH 2/7] pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_DISABLE readback

[Chen-Yu Tsai]

On Wed, Jan 19, 2022 at 9:42 AM Guodong Liu <guodong.liu at mediatek.com> wrote:
>
> -----Original Message-----
> From: Chen-Yu Tsai <wenst at chromium.org>
> To: Sean Wang <sean.wang at kernel.org>, Linus Walleij <
> linus.walleij at linaro.org>, Matthias Brugger <matthias.bgg at gmail.com>
> Cc: Chen-Yu Tsai <wenst at chromium.org>,
> linux-mediatek at lists.infradead.org, linux-gpio at vger.kernel.org,
> linux-arm-kernel at lists.infradead.org, linux-kernel at vger.kernel.org,
> Zhiyong Tao <zhiyong.tao at mediatek.com>, Guodong Liu <
> guodong.liu at mediatek.com>
> Subject: [PATCH 2/7] pinctrl: mediatek: paris: Fix
> PIN_CONFIG_BIAS_DISABLE readback
> Date: Tue, 11 Jan 2022 19:22:39 +0800
>
> When reading back pin bias settings, if the pin is not in a
> bias-disabled state, the function should return -EINVAL.
>
> Fix this in the mediatek-paris pinctrl library so that the read back
> state is not littered with bogus a "input bias disabled" combined with
> "pull up" or "pull down" states.
>
> Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that
> implements the vendor dt-bindings")
> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> ---
>  drivers/pinctrl/mediatek/pinctrl-paris.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c
> b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index f9f9110f2107..1ca598ea7ba7 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -97,8 +97,8 @@ static int mtk_pinconf_get(struct pinctrl_dev
> *pctldev,
>                         if (err)
>                                 goto out;
>                         if (param == PIN_CONFIG_BIAS_DISABLE) {
> -                               if (ret == MTK_PUPD_SET_R1R0_00)
> -                                       ret = MTK_DISABLE;
> +                               if (ret != MTK_PUPD_SET_R1R0_00)
> +                                       err = -EINVAL;
> Hi Chen-Yu
>
> When tht API "hw->soc->bias_get_combo(hw, desc, &pullup, &ret)" is
> called,
> The ret vaule of may be MTK_DISABLE OR MTK_PUPD_SET_R1R0_00 or  (pullen
> == 0),  All those cases are expected to be as "bias-disable".
> We advices to keep original code,
> +                               if (ret == MTK_PUPD_SET_R1R0_00)
> +
>                                 ret = MTK_DISABLE;
> +                               if (ret != MTK_DISABLE)
> +                                       err = -EINVAL;

IIUC you are suggesting to assign MTK_DISABLE to ret in the other two cases,
and then check if ret == MTK_DISABLE.

Thanks for pointing that out.

ChenYu

> Thanks
>                         } else if (param == PIN_CONFIG_BIAS_PULL_UP) {
>                                 /* When desire to get pull-up value,
> return
>                                  *  error if current setting is pull-
> down
>