[PATCH v10 05/13] iommu/mediatek: Add device_link between the consumer and the larb devices

[Yong Wu]

MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.

        M4U
         |
    smi-common
         |
  -------------
  |         |    ...
  |         |
larb1     larb2
  |         |
vdec       venc

When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.

Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

This patch adds device_link between the consumer and the larbs.

When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.

2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.

Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.

Meanwhile, Currently we don't have a device connect with 2 larbs at the
same time. Disallow this case, print the error log.

[1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/1086569/

Suggested-by: Tomasz Figa <tfiga at chromium.org>
Signed-off-by: Yong Wu <yong.wu at mediatek.com>
Tested-by: Frank Wunderlich <frank-w at public-files.de> # BPI-R2/MT7623
Acked-by: Joerg Roedel <jroedel at suse.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
 drivers/iommu/mtk_iommu.c    | 30 ++++++++++++++++++++++++++++++
 drivers/iommu/mtk_iommu_v1.c | 29 ++++++++++++++++++++++++++++-
 2 files changed, 58 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 5cff5bc556d4..77df61092be3 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -562,22 +562,52 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct mtk_iommu_data *data;
+	struct device_link *link;
+	struct device *larbdev;
+	unsigned int larbid, larbidx, i;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return ERR_PTR(-ENODEV); /* Not a iommu client device */
 
 	data = dev_iommu_priv_get(dev);
 
+	/*
+	 * Link the consumer device with the smi-larb device(supplier).
+	 * The device that connects with each a larb is a independent HW.
+	 * All the ports in each a device should be in the same larbs.
+	 */
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	for (i = 1; i < fwspec->num_ids; i++) {
+		larbidx = MTK_M4U_TO_LARB(fwspec->ids[i]);
+		if (larbid != larbidx) {
+			dev_err(dev, "Can only use one larb. Fail at larb%d-%d.\n",
+				larbid, larbidx);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
 	return &data->iommu;
 }
 
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 4089077256f4..4052aad75a81 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct of_phandle_args iommu_spec;
 	struct mtk_iommu_data *data;
-	int err, idx = 0;
+	int err, idx = 0, larbid, larbidx;
+	struct device_link *link;
+	struct device *larbdev;
 
 	/*
 	 * In the deferred case, free the existed fwspec.
@@ -453,6 +455,23 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 
 	data = dev_iommu_priv_get(dev);
 
+	/* Link the consumer device with the smi-larb device(supplier) */
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	for (idx = 1; idx < fwspec->num_ids; idx++) {
+		larbidx = mt2701_m4u_to_larb(fwspec->ids[idx]);
+		if (larbid != larbidx) {
+			dev_err(dev, "Can only use one larb. Fail at larb%d-%d.\n",
+				larbid, larbidx);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
 	return &data->iommu;
 }
 
@@ -473,10 +492,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
-- 
2.18.0