[PATCH v4 2/5] arm64: dts: mediatek: Correct SPI clock of MT8192

[allen-kh.cheng]

From: Allen-KH Cheng <Allen-KH.Cheng at mediatek.com>

When the initial devicetree for mt8192 was added in 48489980e27e ("arm64:
dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile"), the
clock driver for mt8192 was not yet upstream, so the clock property nodes
were set to the clk26m clock as a placeholder.

Given that the clock driver has since been added through 710573dee31b ("clk:
mediatek: Add MT8192 basic clocks support"), as well as its dt-bindings
through f35f1a23e0e1 ("clk: mediatek: Add dt-bindings of MT8192 clocks") and
devicetree nodes through 5d2b897bc6f5 ("arm64: dts: mediatek: Add mt8192
clock controllers"), fix the SPI clock property to point to the actual
clock.

Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng at mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt8192.dtsi | 48 ++++++++++++------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index cfb67cc40c2c..47d056cc5dad 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -355,9 +355,9 @@
 			#size-cells = <0>;
 			reg = <0 0x1100a000 0 0x1000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -369,9 +369,9 @@
 			#size-cells = <0>;
 			reg = <0 0x11010000 0 0x1000>;
 			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI1>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -383,9 +383,9 @@
 			#size-cells = <0>;
 			reg = <0 0x11012000 0 0x1000>;
 			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI2>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -397,9 +397,9 @@
 			#size-cells = <0>;
 			reg = <0 0x11013000 0 0x1000>;
 			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI3>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -411,9 +411,9 @@
 			#size-cells = <0>;
 			reg = <0 0x11018000 0 0x1000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI4>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -425,9 +425,9 @@
 			#size-cells = <0>;
 			reg = <0 0x11019000 0 0x1000>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI5>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -439,9 +439,9 @@
 			#size-cells = <0>;
 			reg = <0 0x1101d000 0 0x1000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI6>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -453,9 +453,9 @@
 			#size-cells = <0>;
 			reg = <0 0x1101e000 0 0x1000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI7>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
-- 
2.18.0