[PATCH 2/7] pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_DISABLE readback

[AngeloGioacchino Del Regno]

Il 11/01/22 12:22, Chen-Yu Tsai ha scritto:
> When reading back pin bias settings, if the pin is not in a
> bias-disabled state, the function should return -EINVAL.
> 
> Fix this in the mediatek-paris pinctrl library so that the read back
> state is not littered with bogus a "input bias disabled" combined with
> "pull up" or "pull down" states.
> 
> Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>


Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

> ---
>   drivers/pinctrl/mediatek/pinctrl-paris.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index f9f9110f2107..1ca598ea7ba7 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -97,8 +97,8 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
>   			if (err)
>   				goto out;
>   			if (param == PIN_CONFIG_BIAS_DISABLE) {
> -				if (ret == MTK_PUPD_SET_R1R0_00)
> -					ret = MTK_DISABLE;
> +				if (ret != MTK_PUPD_SET_R1R0_00)
> +					err = -EINVAL;
>   			} else if (param == PIN_CONFIG_BIAS_PULL_UP) {
>   				/* When desire to get pull-up value, return
>   				 *  error if current setting is pull-down
>