[PATCH 1/2] soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
Johnson Wang
johnson.wang at mediatek.com
Thu Jan 6 18:05:27 PST 2022
Hi AngeloGioacchino,
On Tue, 2022-01-04 at 10:05 +0100, AngeloGioacchino Del Regno wrote:
> Il 30/12/21 12:49, Johnson Wang ha scritto:
> > MT8186 are highly integrated SoC and use PMIC_MT6366 for
> > power management. This patch adds pwrap master driver to
> > access PMIC_MT6366.
> >
> > Signed-off-by: Johnson Wang <johnson.wang at mediatek.com>
>
> Hello Johnson,
> thanks for the patch!
>
> However, there's something to improve...
>
> > ---
> > drivers/soc/mediatek/mtk-pmic-wrap.c | 86
> > ++++++++++++++++++++++++++--
> > 1 file changed, 80 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c
> > b/drivers/soc/mediatek/mtk-pmic-wrap.c
> > index 952bc554f443..4af713274468 100644
> > --- a/drivers/soc/mediatek/mtk-pmic-wrap.c
> > +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
> > @@ -30,6 +30,7 @@
> > #define PWRAP_GET_WACS_REQ(x) (((x) >> 19) &
> > 0x00000001)
> > #define PWRAP_STATE_SYNC_IDLE0 BIT(20)
> > #define PWRAP_STATE_INIT_DONE0 BIT(21)
> > +#define PWRAP_STATE_INIT_DONE0_V2 BIT(22)
> > #define PWRAP_STATE_INIT_DONE1 BIT(15)
> >
> > /* macro for WACS FSM */
> > @@ -77,6 +78,8 @@
> > #define PWRAP_CAP_INT1_EN BIT(3)
> > #define PWRAP_CAP_WDT_SRC1 BIT(4)
> > #define PWRAP_CAP_ARB BIT(5)
> > +#define PWRAP_CAP_MONITOR_V2 BIT(6)
> > +#define PWRAP_CAP_ARB_V2 BIT(8)
> >
> > /* defines for slave device wrapper registers */
> > enum dew_regs {
> > @@ -1063,6 +1066,55 @@ static int mt8516_regs[] = {
> > [PWRAP_MSB_FIRST] = 0x170,
> > };
> >
> > +static int mt8186_regs[] = {
> > + [PWRAP_MUX_SEL] = 0x0,
> > + [PWRAP_WRAP_EN] = 0x4,
> > + [PWRAP_DIO_EN] = 0x8,
> > + [PWRAP_RDDMY] = 0x20,
> > + [PWRAP_CSHEXT_WRITE] = 0x24,
> > + [PWRAP_CSHEXT_READ] = 0x28,
> > + [PWRAP_CSLEXT_WRITE] = 0x2C,
> > + [PWRAP_CSLEXT_READ] = 0x30,
> > + [PWRAP_EXT_CK_WRITE] = 0x34,
> > + [PWRAP_STAUPD_CTRL] = 0x3C,
> > + [PWRAP_STAUPD_GRPEN] = 0x40,
> > + [PWRAP_EINT_STA0_ADR] = 0x44,
> > + [PWRAP_EINT_STA1_ADR] = 0x48,
> > + [PWRAP_INT_CLR] = 0xC8,
> > + [PWRAP_INT_FLG] = 0xC4,
> > + [PWRAP_MAN_EN] = 0x7C,
> > + [PWRAP_MAN_CMD] = 0x80,
> > + [PWRAP_WACS0_EN] = 0x8C,
> > + [PWRAP_WACS1_EN] = 0x94,
> > + [PWRAP_WACS2_EN] = 0x9C,
> > + [PWRAP_INIT_DONE0] = 0x90,
> > + [PWRAP_INIT_DONE1] = 0x98,
> > + [PWRAP_INIT_DONE2] = 0xA0,
> > + [PWRAP_INT_EN] = 0xBC,
> > + [PWRAP_INT1_EN] = 0xCC,
> > + [PWRAP_INT1_FLG] = 0xD4,
> > + [PWRAP_INT1_CLR] = 0xD8,
> > + [PWRAP_TIMER_EN] = 0xF0,
> > + [PWRAP_WDT_UNIT] = 0xF8,
> > + [PWRAP_WDT_SRC_EN] = 0xFC,
> > + [PWRAP_WDT_SRC_EN_1] = 0x100,
> > + [PWRAP_WDT_FLG] = 0x104,
> > + [PWRAP_SPMINF_STA] = 0x1B4,
> > + [PWRAP_DCM_EN] = 0x1EC,
> > + [PWRAP_DCM_DBC_PRD] = 0x1F0,
> > + [PWRAP_GPSINF_0_STA] = 0x204,
> > + [PWRAP_GPSINF_1_STA] = 0x208,
> > + [PWRAP_WACS0_CMD] = 0xC00,
> > + [PWRAP_WACS0_RDATA] = 0xC04,
> > + [PWRAP_WACS0_VLDCLR] = 0xC08,
> > + [PWRAP_WACS1_CMD] = 0xC10,
> > + [PWRAP_WACS1_RDATA] = 0xC14,
> > + [PWRAP_WACS1_VLDCLR] = 0xC18,
> > + [PWRAP_WACS2_CMD] = 0xC20,
> > + [PWRAP_WACS2_RDATA] = 0xC24,
> > + [PWRAP_WACS2_VLDCLR] = 0xC28,
> > +};
> > +
> > enum pmic_type {
> > PMIC_MT6323,
> > PMIC_MT6351,
> > @@ -1083,6 +1135,7 @@ enum pwrap_type {
> > PWRAP_MT8135,
> > PWRAP_MT8173,
> > PWRAP_MT8183,
> > + PWRAP_MT8186,
> > PWRAP_MT8195,
> > PWRAP_MT8516,
> > };
> > @@ -1535,6 +1588,7 @@ static int pwrap_init_cipher(struct
> > pmic_wrapper *wrp)
> > case PWRAP_MT6779:
> > case PWRAP_MT6797:
> > case PWRAP_MT8173:
> > + case PWRAP_MT8186:
> > case PWRAP_MT8516:
> > pwrap_writel(wrp, 1, PWRAP_CIPHER_EN);
> > break;
> > @@ -2069,6 +2123,19 @@ static struct pmic_wrapper_type pwrap_mt8516
> > = {
> > .init_soc_specific = NULL,
> > };
> >
> > +static struct pmic_wrapper_type pwrap_mt8186 = {
> > + .regs = mt8186_regs,
> > + .type = PWRAP_MT8186,
> > + .arb_en_all = 0xfb27f,
> > + .int_en_all = 0xfffffffe, /* disable WatchDog Timeout for bit 1
> > */
> > + .int1_en_all = 0x000017ff, /* disable Matching interrupt for
> > bit 13 */
> > + .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
> > + .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
> > + .caps = PWRAP_CAP_INT1_EN | PWRAP_CAP_MONITOR_V2 |
> > PWRAP_CAP_ARB_V2,
> > + .init_reg_clock = pwrap_common_init_reg_clock,
> > + .init_soc_specific = NULL,
> > +};
> > +
> > static const struct of_device_id of_pwrap_match_tbl[] = {
> > {
> > .compatible = "mediatek,mt2701-pwrap",
> > @@ -2097,6 +2164,9 @@ static const struct of_device_id
> > of_pwrap_match_tbl[] = {
> > }, {
> > .compatible = "mediatek,mt8183-pwrap",
> > .data = &pwrap_mt8183,
> > + }, {
> > + .compatible = "mediatek,mt8186-pwrap",
> > + .data = &pwrap_mt8186,
> > }, {
> > .compatible = "mediatek,mt8195-pwrap",
> > .data = &pwrap_mt8195,
> > @@ -2112,7 +2182,7 @@ MODULE_DEVICE_TABLE(of, of_pwrap_match_tbl);
> > static int pwrap_probe(struct platform_device *pdev)
> > {
> > int ret, irq;
> > - u32 mask_done;
> > + u32 rdata;
> > struct pmic_wrapper *wrp;
> > struct device_node *np = pdev->dev.of_node;
> > const struct of_device_id *of_slave_id = NULL;
> > @@ -2207,12 +2277,16 @@ static int pwrap_probe(struct
> > platform_device *pdev)
> > }
> > }
> >
> > - if (HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
> > - mask_done = PWRAP_STATE_INIT_DONE1;
> > + if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
> > + rdata = pwrap_readl(wrp, PWRAP_WACS2_RDATA) &
> > + PWRAP_STATE_INIT_DONE0;
> > + else if (!HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB_V2))
> > + rdata = pwrap_readl(wrp, PWRAP_WACS2_RDATA) &
> > + PWRAP_STATE_INIT_DONE0_V2;
>
> Why are you changing the logic here?
> I think that assigning to `mask_done` is a good option, reducing
> duplication and
> also reducing the amount of changes for this patch.
>
> That said, I would simply do it as follows:
>
> if (HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB))
>
> mask_done = PWRAP_STATE_INIT_DONE1;
>
> else if (HAS_CAP(wrp->master->caps, PWRAP_CAP_ARB_V2))
>
> mask_done = PWRAP_STATE_INIT_DONE0_V2;
>
> else
>
> mask_done = PWRAP_STATE_INIT_DONE0;
>
> Regards,
> - Angelo
Thank for your review.
Your advice looks good to me.
It makes code more straightforward and have correct logic.
I will update it in next patch.
More information about the Linux-mediatek
mailing list