[PATCH v3 28/33] iommu/mediatek: Add bank_nr and bank_enable

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Tue Jan 4 07:53:22 PST 2022


Il 23/09/21 13:58, Yong Wu ha scritto:
> Prepare for supporting multi banks, Adds two variables in the plat_data:
> bank_nr: the bank number that this SoC support;
> bank_enable: list if the banks is enabled.
> 
> Add them for all the current SoC, bank_nr always is 1 and only
> bank_enable[0] is enabled.
> 
> Signed-off-by: Yong Wu <yong.wu at mediatek.com>
> ---
>   drivers/iommu/mtk_iommu.c | 18 ++++++++++++++++++
>   drivers/iommu/mtk_iommu.h |  3 +++
>   2 files changed, 21 insertions(+)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index c139675d99e6..4ad85469f68f 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -1134,6 +1134,8 @@ static const struct mtk_iommu_plat_data mt2712_data = {
>   			NOT_STD_AXI_MODE | MTK_IOMMU_TYPE_MM,
>   	.hw_list      = &m4ulist,
>   	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
> +	.bank_nr      = 1,
> +	.bank_enable  = {true},
>   	.iova_region  = single_domain,
>   	.iova_region_nr = ARRAY_SIZE(single_domain),
>   	.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
> @@ -1144,6 +1146,8 @@ static const struct mtk_iommu_plat_data mt6779_data = {
>   	.flags         = HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN | WR_THROT_EN |
>   			 NOT_STD_AXI_MODE | MTK_IOMMU_TYPE_MM,
>   	.inv_sel_reg   = REG_MMU_INV_SEL_GEN2,
> +	.bank_nr       = 1,
> +	.bank_enable   = {true},
>   	.iova_region   = single_domain,
>   	.iova_region_nr = ARRAY_SIZE(single_domain),
>   	.larbid_remap  = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
> @@ -1154,6 +1158,8 @@ static const struct mtk_iommu_plat_data mt8167_data = {
>   	.flags        = RESET_AXI | HAS_LEGACY_IVRP_PADDR | NOT_STD_AXI_MODE |
>   			MTK_IOMMU_TYPE_MM,
>   	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
> +	.bank_nr      = 1,
> +	.bank_enable  = {true},
>   	.iova_region  = single_domain,
>   	.iova_region_nr = ARRAY_SIZE(single_domain),
>   	.larbid_remap = {{0}, {1}, {2}}, /* Linear mapping. */
> @@ -1165,6 +1171,8 @@ static const struct mtk_iommu_plat_data mt8173_data = {
>   			HAS_LEGACY_IVRP_PADDR | NOT_STD_AXI_MODE |
>   			MTK_IOMMU_TYPE_MM,
>   	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
> +	.bank_nr      = 1,
> +	.bank_enable  = {true},
>   	.iova_region  = single_domain,
>   	.iova_region_nr = ARRAY_SIZE(single_domain),
>   	.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
> @@ -1174,6 +1182,8 @@ static const struct mtk_iommu_plat_data mt8183_data = {
>   	.m4u_plat     = M4U_MT8183,
>   	.flags        = RESET_AXI | MTK_IOMMU_TYPE_MM,
>   	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
> +	.bank_nr      = 1,
> +	.bank_enable  = {true},
>   	.iova_region  = single_domain,
>   	.iova_region_nr = ARRAY_SIZE(single_domain),
>   	.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
> @@ -1185,6 +1195,8 @@ static const struct mtk_iommu_plat_data mt8192_data = {
>   			  WR_THROT_EN | IOVA_34_EN | NOT_STD_AXI_MODE |
>   			  MTK_IOMMU_TYPE_MM,
>   	.inv_sel_reg    = REG_MMU_INV_SEL_GEN2,
> +	.bank_nr        = 1,
> +	.bank_enable    = {true},
>   	.iova_region    = mt8192_multi_dom,
>   	.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
>   	.larbid_remap   = {{0}, {1}, {4, 5}, {7}, {2}, {9, 11, 19, 20},
> @@ -1196,6 +1208,8 @@ static const struct mtk_iommu_plat_data mt8195_data_infra = {
>   	.flags            = WR_THROT_EN | DCM_DISABLE |
>   			    MTK_IOMMU_TYPE_INFRA | IFA_IOMMU_PCIe_SUPPORT,
>   	.pericfg_comp_str = "mediatek,mt8195-pericfg_ao",
> +	.bank_nr	  = 1,
> +	.bank_enable      = {true},
>   	.inv_sel_reg      = REG_MMU_INV_SEL_GEN2,
>   	.iova_region      = single_domain,
>   	.iova_region_nr   = ARRAY_SIZE(single_domain),
> @@ -1208,6 +1222,8 @@ static const struct mtk_iommu_plat_data mt8195_data_vdo = {
>   			  SHARE_PGTABLE | MTK_IOMMU_TYPE_MM,
>   	.hw_list        = &m4ulist,
>   	.inv_sel_reg    = REG_MMU_INV_SEL_GEN2,
> +	.bank_nr	= 1,
> +	.bank_enable    = {true},
>   	.iova_region	= mt8192_multi_dom,
>   	.iova_region_nr	= ARRAY_SIZE(mt8192_multi_dom),
>   	.larbid_remap   = {{2, 0}, {21}, {24}, {7}, {19}, {9, 10, 11},
> @@ -1221,6 +1237,8 @@ static const struct mtk_iommu_plat_data mt8195_data_vpp = {
>   			  SHARE_PGTABLE | MTK_IOMMU_TYPE_MM,
>   	.hw_list        = &m4ulist,
>   	.inv_sel_reg    = REG_MMU_INV_SEL_GEN2,
> +	.bank_nr	= 1,
> +	.bank_enable    = {true},
>   	.iova_region	= mt8192_multi_dom,
>   	.iova_region_nr	= ARRAY_SIZE(mt8192_multi_dom),
>   	.larbid_remap   = {{1}, {3}, {22, 0, 0, 0, 23}, {8},
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index 881fade8d39a..dc0190edebf0 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -62,6 +62,9 @@ struct mtk_iommu_plat_data {
>   	struct list_head			*hw_list;
>   	unsigned int				iova_region_nr;
>   	const struct mtk_iommu_iova_region	*iova_region;
> +
> +	unsigned int        bank_nr;

As said in the review for patch 26/33, maybe this can be renamed as `num_banks`
instead... and also, this can be a `u8` to save some memory.

> +	bool                bank_enable[MTK_IOMMU_BANK_MAX];
>   	unsigned char       larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
>   };
>   
> 




More information about the Linux-mediatek mailing list