[RESEND v17 0/2] mtk: add ADSP mailbox controller for MT8195
Allen-KH Cheng
allen-kh.cheng at mediatek.com
Thu Feb 24 05:30:43 PST 2022
Mediatek ADSP IPC is used to send notification or short message
between processors with dsp. It will place the message to the
share buffer and will access the ADSP mailbox registers to kick
dsp. Two mailboxes used to send notification or short message
between processors with dsp.
This patchset was tested and confirmed on MT8195 cherry board.
Based on tag: next-20220223, linux-next/master
changes since v16:
- fix WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox
/mtk-adsp-mailbox.o. Add MODULE_LICENSE in the last line.
- Due to WARNING: Missing or malformed SPDX-License-Identifier tag
in line 1 in checkpatch, we don't remove SPDX-License in line 1.
changes since v15:
- add paragraphs to describe the config symbols fully
changes since v14:
- add inline for get_mtk_adsp_mbox_priv
changes since v13:
- rebase on v5.16-rc8
- add back ptr check from of_device_get_match_data
changes since v12:
- remove of_device_get_match_data ptr check:
of_device_get_match_data(dev) will never going to return NULL.
driver probe with compatible mediatek,mt8195-adsp-mbox.
changes since v11:
- remove useless MODULE_LICENSE
changes since v10:
- split up v9 into two separate submissions
changes since v9:
- rename adsp_mbox_chan_ops to mtk_adsp_mbox_chan_ops
changes since v8:
- remove struct adsp_mbox_ch_info
- add get_mtk_adsp_mbox_priv
- use mtk_adsp_mbox_priv va_mboxreg address in adsp mbox driver
- add struct mtk_adsp_mbox_cfg for DSP mbox register offset
- remove adsp mbox register offset hard code define
- remove mtk-adsp-ipc.h reference in adsp mbox driver
changes since v7:
- add mtk prefix for adsp ipc functions
- rename adsp_mbox_ch_info to mtk_adsp_mbox_ch_info
- remove incorrect reviewers in commit message
changes since v6:
- dt-bindings: change example dtsi node.
- rename config MTK_ADSP_IPC_MBOX to MTK_ADSP_MBOX
- remove unused variable
- add reviewers
changes since v5:
- remove some redundant code
changes since v4:
- use switch ... case in adsp_ipc_recv
- add error handling path for chan_name pointer
- refine some code to be concise
changes since v3:
- reorder MTK_ADSP_IPC_MBOX config
- remove some redundant code
- remove lock in mtk-adsp-mailbox
changes since v2:
- separate adsp_mailbox into two instances
changes since v1:
- fix dt_binding_check error
Allen-KH Cheng (2):
dt-bindings: mailbox: mtk,adsp-mbox: add mtk adsp-mbox document
mailbox: mediatek: add support for adsp mailbox controller
.../bindings/mailbox/mtk,adsp-mbox.yaml | 52 ++++++
drivers/mailbox/Kconfig | 9 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/mtk-adsp-mailbox.c | 176 ++++++++++++++++++
4 files changed, 239 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
create mode 100644 drivers/mailbox/mtk-adsp-mailbox.c
--
2.18.0
More information about the Linux-mediatek
mailing list