[PATCH v2 2/2] soc: mediatek: pm-domains: Add support for mt8188

[Garmin Chang (張家銘)]

On Fri, 2022-11-25 at 11:27 +0800, garmin.chang wrote:
> On Tue, 2022-10-04 at 10:19 +0200, AngeloGioacchino Del Regno wrote:
> > Il 28/09/22 10:43, Garmin.Chang ha scritto:
> > > Add domain control data including bus protection data size
> > > change due to more protection steps in mt8188.
> > > 
> > > Signed-off-by: Garmin.Chang <Garmin.Chang at mediatek.com>
> > > ---
> > >   drivers/soc/mediatek/mt8188-pm-domains.h | 623
> > > +++++++++++++++++++++++
> > >   drivers/soc/mediatek/mtk-pm-domains.c    |   5 +
> > >   include/linux/soc/mediatek/infracfg.h    | 121 +++++
> > >   3 files changed, 749 insertions(+)
> > >   create mode 100644 drivers/soc/mediatek/mt8188-pm-domains.h
> > > 
> > > diff --git a/drivers/soc/mediatek/mt8188-pm-domains.h
> > > b/drivers/soc/mediatek/mt8188-pm-domains.h
> > > new file mode 100644
> > > index 000000000000..63181f05457e
> > > --- /dev/null
> > > +++ b/drivers/soc/mediatek/mt8188-pm-domains.h
> > > @@ -0,0 +1,623 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2022 MediaTek Inc.
> > > + * Author: Garmin Chang <garmin.chang at mediatek.com>
> > > + */
> > > +
> > > +#ifndef __SOC_MEDIATEK_MT8188_PM_DOMAINS_H
> > > +#define __SOC_MEDIATEK_MT8188_PM_DOMAINS_H
> > > +
> > > +#include "mtk-pm-domains.h"
> > > +#include <dt-bindings/power/mediatek,mt8188-power.h>
> > > +
> > > +/*
> > > + * MT8188 power domain support
> > > + */
> > > +
> > > +static const struct scpsys_domain_data
> > > scpsys_domain_data_mt8188[]
> > > = {
> > > +	[MT8188_POWER_DOMAIN_MFG0] = {
> > > +		.name = "mfg0",
> > > +		.sta_mask = BIT(1),
> > > +		.ctl_offs = 0x300,
> > > +		.pwr_sta_offs = 0x174,
> > > +		.pwr_sta2nd_offs = 0x178,
> > > +		.sram_pdn_bits = BIT(8),
> > > +		.sram_pdn_ack_bits = BIT(12),
> > > +		.caps = MTK_SCPD_KEEP_DEFAULT_OFF |
> > > MTK_SCPD_DOMAIN_SUPPLY,
> > > +	},
> > > +	[MT8188_POWER_DOMAIN_MFG1] = {
> > > +		.name = "mfg1",
> > > +		.sta_mask = BIT(2),
> > > +		.ctl_offs = 0x304,
> > > +		.pwr_sta_offs = 0x174,
> > > +		.pwr_sta2nd_offs = 0x178,
> > > +		.sram_pdn_bits = BIT(8),
> > > +		.sram_pdn_ack_bits = BIT(12),
> > > +		.bp_infracfg = {
> > > +			BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MFG1_STEP1,
> > > +				    MT8188_TOP_AXI_PROT_EN_SET,
> > > +				    MT8188_TOP_AXI_PROT_EN_CLR,
> > > +				    MT8188_TOP_AXI_PROT_EN_STA),
> > > +			BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_MFG1_STEP2
> > > ,
> > > +				    MT8188_TOP_AXI_PROT_EN_2_SET,
> > > +				    MT8188_TOP_AXI_PROT_EN_2_CLR,
> > > +				    MT8188_TOP_AXI_PROT_EN_2_STA),
> > > +			BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_1_MFG1_STEP3
> > > ,
> > > +				    MT8188_TOP_AXI_PROT_EN_1_SET,
> > > +				    MT8188_TOP_AXI_PROT_EN_1_CLR,
> > > +				    MT8188_TOP_AXI_PROT_EN_1_STA),
> > > +			BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_MFG1_STEP4
> > > ,
> > > +				    MT8188_TOP_AXI_PROT_EN_2_SET,
> > > +				    MT8188_TOP_AXI_PROT_EN_2_CLR,
> > > +				    MT8188_TOP_AXI_PROT_EN_2_STA),
> > > +			BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MFG1_STEP5,
> > > +				    MT8188_TOP_AXI_PROT_EN_SET,
> > > +				    MT8188_TOP_AXI_PROT_EN_CLR,
> > > +				    MT8188_TOP_AXI_PROT_EN_STA),
> > > +			BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VD
> > > NR_MFG1_STEP6,
> > > +				    MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VD
> > > NR_SET,
> > > +				    MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VD
> > > NR_CLR,
> > > +				    MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VD
> > > NR_STA),
> > > +		},
> > > +		.caps = MTK_SCPD_KEEP_DEFAULT_OFF,
> > 
> > Please add MTK_SCPD_DOMAIN_SUPPLY cap to MFG1 as well.
> > For more information, please look at:
> > 13bde169c6fe ("soc: mediatek: mtk-pm-domains: Allow probing vreg
> > supply on two MFGs")
> > 
> > Regards,
> > Angelo
> > 
> 
> Thank you for your suggestion.
> 
> Accroding to /sys/kernel/debug/pm_genpd/pm_genpd_summary, mfg0 is the
> parent of mfg1 and mfg1 is the parent of mfg2, mfg3 and mfg4.
> Before the devices power on mfg2, mfg3 and mfg4, system will power on
> mfg1 first. Also before the devices power on mfg1, system will power
> on
> mfg0 first.
> Because mfg0 is the root of mfg1, mfg2, mfg3 and mfg4 and
> MTK_SCPD_DOMAIN_SUPPLY is configured on mfg0, so
> MTK_SCPD_DOMAIN_SUPPLY
> is also applied on mfg1, mfg2, mfg3 and mfg4.
> 
> Thanks,
> Best Regards,
> Garmin


  I will apply 13bde169c6fe ("soc: mediatek: mtk-pm-domains: Allow 
  probing vreg supply on two MFGs") in next verion.

> Thanks,
> Best Regards,
> Garmin