[PATCH v2 3/9] spi: mtk-snfi: Add optional nfi_hclk which needed for MT7986

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Wed Dec 7 02:08:38 PST 2022


Il 07/12/22 02:42, Xiangsheng Hou (侯祥胜) ha scritto:
> Hi Angelo,
> 
> On Mon, 2022-12-05 at 15:21 +0100, AngeloGioacchino Del Regno wrote:
>> Il 05/12/22 07:57, Xiangsheng Hou ha scritto:
>>> Add optional nfi_hclk which needed for MT7986.
>>>
>>> Signed-off-by: Xiangsheng Hou <xiangsheng.hou at mediatek.com>
>>
>> Is there any operation for which you need NFI_HCLK enabled, but at
>> the same time
>> PAD_CLK and/or NFI_CLK can be disabled?
> 
> No, for the new IP design on MT7986, will need the
> PAD_CLK/NFI_CLK/NFI_HCLK enabled at the same time.
> 
>> If NFI_HCLK and NFI_CLK must always be ON at the same time, adding
>> this clock to
>> spi-mtk-snfi.c is *not* an optimal way of doing things: you can, at
>> this point,
>> set NFI_HCLK as parent of NFI_CLK in the MT7986 clock driver instead,
>> without
>> making any addition to this driver at all.
> 
> For some IC, there may have only NFI_CLK/PAD_CLK, and have no NFI_HCLK,
> this rely on IC design.
> 

I've just checked clk-mt7986-infracfg and we can't reparent NFI1_CK, nor SPINFI1_CK
as they have xxxx_sel parents already, which are not common with the HCK.

You're right, the addition of the nfi_hclk clock is needed, which means that for
this commit, you get my


Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>


P.S.: Thanks for clarifying!

Regards,
Angelo



More information about the Linux-mediatek mailing list