[PATCH v4 net-next 0/9] dt-binding preparation for ocelot switches

Colin Foster colin.foster at in-advantage.com
Fri Dec 2 12:45:50 PST 2022


Ocelot switches have the abilitiy to be used internally via
memory-mapped IO or externally via SPI or PCIe. This brings up issues
for documentation, where the same chip might be accessed internally in a
switchdev manner, or externally in a DSA configuration. This patch set
is perparation to bring DSA functionality to the VSC7512, utilizing as
much as possible with an almost identical VSC7514 chip.

This patch set changed quite a bit from v2, so I'll omit the background
of how those sets came to be. Rob offered a lot of very useful guidance.
My thanks.

At the end of the day, with this patch set, there should be a framework
to document Ocelot switches (and any switch) in scenarios where they can
be controlled internally (ethernet-switch) or externally (dsa-switch).

---

v3 -> v4
  * Renamed "base" to "ethernet-ports" to avoid confusion with the concept
    of a base class.
  * Squash ("dt-bindings: net: dsa: mediatek,mt7530: fix port description location")
    patch into ("dt-bindings: net: dsa: utilize base definitions for standard dsa
    switches")
  * Corrections to fix confusion about additonalProperties vs unevaluatedProperties.
    See specific patches for details.

v2 -> v3
  * Restructured everything to use a "base" iref for devices that don't
    have additional properties, and simply a "ref" for devices that do.
  * New patches to fix up brcm,sf2, qca8k, and mt7530
  * Fix unevaluatedProperties errors from previous sets (see specific
    patches for more detail)
  * Removed redundant "Device Tree Binding" from titles, where applicable.

v1 -> v2
  * Two MFD patches were brought into the MFD tree, so are dropped
  * Add first patch 1/6 to allow DSA devices to add ports and port
    properties
  * Test qca8k against new dt-bindings and fix warnings. (patch 2/6)
  * Add tags (patch 3/6)
  * Fix vsc7514 refs and properties

---

Colin Foster (9):
  dt-bindings: net: dsa: sf2: fix brcm,use-bcm-hdr documentation
  dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from
    switch node
  dt-bindings: net: dsa: utilize base definitions for standard dsa
    switches
  dt-bindings: net: dsa: allow additional ethernet-port properties
  dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
  dt-bindings: net: dsa: mediatek,mt7530: remove unnecessary dsa-port
    reference
  dt-bindings: net: add generic ethernet-switch
  dt-bindings: net: add generic ethernet-switch-port binding
  dt-bindings: net: mscc,vsc7514-switch: utilize generic
    ethernet-switch.yaml

 .../bindings/net/dsa/arrow,xrs700x.yaml       |  2 +-
 .../devicetree/bindings/net/dsa/brcm,b53.yaml |  2 +-
 .../devicetree/bindings/net/dsa/brcm,sf2.yaml | 15 +++--
 .../devicetree/bindings/net/dsa/dsa-port.yaml | 24 +------
 .../devicetree/bindings/net/dsa/dsa.yaml      | 47 +++++++-------
 .../net/dsa/hirschmann,hellcreek.yaml         |  2 +-
 .../bindings/net/dsa/mediatek,mt7530.yaml     | 17 ++---
 .../bindings/net/dsa/microchip,ksz.yaml       |  2 +-
 .../bindings/net/dsa/microchip,lan937x.yaml   |  2 +-
 .../bindings/net/dsa/mscc,ocelot.yaml         |  2 +-
 .../bindings/net/dsa/nxp,sja1105.yaml         |  2 +-
 .../devicetree/bindings/net/dsa/qca8k.yaml    | 14 +----
 .../devicetree/bindings/net/dsa/realtek.yaml  |  2 +-
 .../bindings/net/dsa/renesas,rzn1-a5psw.yaml  |  2 +-
 .../bindings/net/ethernet-switch-port.yaml    | 25 ++++++++
 .../bindings/net/ethernet-switch.yaml         | 62 +++++++++++++++++++
 .../bindings/net/mscc,vsc7514-switch.yaml     | 31 +---------
 MAINTAINERS                                   |  2 +
 18 files changed, 142 insertions(+), 113 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
 create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch.yaml

-- 
2.25.1




More information about the Linux-mediatek mailing list